Skip header
 

Creating a Device Certificate (Issued by a Certificate Authority)

Create the device certificate using Web Image Monitor. For details about the displayed items and selectable items, see Web Image Monitor Help.

This section explains the use of a certificate issued by a certificate authority as the device certificate.

1Log in as the network administrator from Web Image Monitor.

2Point to [Device Management], and then click [Configuration].

3Click [Device Certificate] under "Security".

4Check the radio button next to the number of the certificate you want to create.

To use SSL/TLS, select [Certificate 1]. To use any other protocol, select the certificate number you want to use.

5Click [Request].

6Configure the necessary settings.

7Click [OK].

The setting is changed.

8Click [OK].

"Requesting" appears for "Certificate Status".

9Log out.

10Apply to the certificate authority for the device certificate.

The application procedure depends on the certificate authority. For details, contact the certificate authority.

For the application, click Web browser screen illustrationWeb Image Monitor Details icon and use the information that appears in "Certificate Details".

Note

  • The issuing location may not be displayed if you request 2 certificates at the same time. When you install a certificate, be sure to check the certificate destination and installation procedure.

  • Web Image Monitor can be used for creating the device certificate but not for requesting the certificate to the certificate authority.

  • Click [Cancel Request] to cancel the request for the device certificate.