Previous
This section explains the procedure for stamping originals that are scanned from the ADF. The stamp indicates the originals have been scanned.
(mainly Europe and Asia)
This function is not available for the Type 6 model.
(mainly North America)
This function is not available for the Type 4, 5, and 6 models.
When scanning a document using ADF, the machine can stamp a circle mark at the bottom of the original. When scanning a two-sided document, the document is marked at the bottom of the front page and top of the rear page.
This function is useful when you want to distinguish scanned originals.
Press [Original Feed Type].
Press [Stamp].
Press [OK].
Last pages are stamped even if you selected not to scan the last page.
Stamping may continue if scanning is interrupted, depending on the cause of interruption.
When the stamp starts getting lighter, replace the cartridge. For details, see "Replacing the Stamp Cartridge", Maintenance and Specifications.
