Skip header
 

Placing originals

To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made on the control panel must match.

Place originals correctly by referring to the following tables:

Exposure Glass

Place the original face down on the exposure glass in either the left-right (landscape) or up-down (portrait) orientation.

Original orientation and control panel key selection

Original orientation

Control panel key

top edge touches rear of exposure glass

Illustration of the original orientation

Operation panel screen illustration

top edge touches top left corner of exposure glass

Illustration of the original orientation

Operation panel screen illustration

ADF

Hold the original so that its text is in the natural readable orientation, and then place it face up in the ADF.

Original orientation and control panel key selection

Original orientation

Control panel key

top edge touches rear of ADF

Illustration of the original orientation

Operation panel screen illustration

top edge placed first

Illustration of the original orientation

Operation panel screen illustration

Note

  • When you specify [Full Color: Text / Photo], [Full Color: Glossy Photo], [Gray Scale], or [Auto Color Select] under [Original Type], and single page TIFF/JPEG or multi-page TIFF is selected as the file type, see the tables below for how to place originals. Originals placed in orientations that are not recommended in the table might appear incorrectly top/bottom oriented on client computer displays.

Exposure glass

Original orientation

Control panel key

top edge touches top left corner of exposure glass

Illustration of the original orientation

Operation panel screen illustration

ADF

Original orientation

Control panel key

top edge placed first

Illustration of the original orientation

Operation panel screen illustration