Previous
Press [Store File].
Select [Store to HDD + Send].
If necessary, specify the stored file's information, such as [User Name], [File Name], [Password], and [Select Folder].
User Name
Press [User Name], and then select a user name. To specify an unregistered user name, press [Manual Entry], and then enter the name. After specifying a user name, press [OK].
File Name
Press [File Name], enter a file name, and then press [OK].
Password
Press [Password], enter a password, and then press [OK]. Re-enter the password for confirmation, and then press [OK].
Select Folder
Specify the folder in which to save the stored files.
Press [OK].
Specify the destination, make any other necessary settings, and then send the e-mail.
For details about sending a file by e-mail, see Basic Procedure for Sending Scan Files by E-mail.
Press the [Start] key.
You can resend stored files by e-mail. To resend stored files, select the files on the Select Stored File screen, and then send them. For details, see Sending a Stored File.
If a file is sent and stored simultaneously with [Security] set, the e-mail will be encrypted and the signature applied, but the stored file will be neither encrypted nor signed.
For details about encrypting stored files, see Security Guide.
