Skip header
 

Half Fold positions

Select the position for folding printed documents in half in the printer driver.

When [Half Fold: Print Outside (Finisher Booklet Tray)] is specified, each piece of printed paper is folded in half with the printed side facing outside, and it is output to the finisher booklet tray.

When [Half Fold: Multi-sheet fold (Finisher Booklet Tray)] is specified, the printed paper is folded in half with the printed side facing outside, and it is stacked onto the finisher booklet tray. This can be used when Booklet Finisher SR3150 is attached, or Booklet Finisher SR3170 is attached to the Type 4, 5, or 6 model.

Important

  • The paper types that can be used for Half Fold function are as follows:

    • Plain (60 to 81 g/m2), Recycled, Special 1, Special 2, Special 3, Middle Thick (82 to 105 g/m2), Thick 1(106 to 169 g/m2), Thick 2(170 to 220 g/m2), Color, Letterhead, Preprinted, Bond, Cardstock

The finished form may vary depending on the paper size. The following table shows the examples of A3Landscape size paper folded in each fold type. For details, see the printer driver Help.

Print Data Direction

Folding Position

Print Inside

Print Outside

Multi-sheet fold

Illustration of paper orientation

Portrait

-

Illustration of folding position

*1

Illustration of folding position

Illustration of paper orientation

Landscape

-

Illustration of folding position

*1

Illustration of folding position

*1 This can be used on the Type 4, 5, and 6 models with Booklet Finisher SR3170 attached.

Note

  • For details about which paper sizes are compatible with which Half Fold function, see "Specifications", Maintenance and Specifications.