Previous
This section describes the user tools in [Screen Device Settings] under [Screen Features].
Screen Startup Mode
Select the start up mode of the Smart Operation Panel.
Normal
When you turn on the power, the [Home] screen appears after the start up screen is displayed. Normal mode uses less energy than Quick mode.
Quick
The [Home] screen appears as soon as you turn on the power.
Default: [Normal]
Screen SD Card Slot
Specify whether or not enable the SD card slot when you use the functions of the Smart Operation Panel.
Default: [Active]
Import Screen Setting Information
You can import the setting information for Screen Features from the SD card.
To use this function, administrator authentication must be enabled.
Export Screen Setting Information
You can export the setting information for Screen Features to the SD card.
To use this function, administrator authentication must be enabled.
Import History
You can check the import history of the setting information of the Screen Features. It shows a history of the 100 most recent imports.
Server Settings
Server Function
Specify whether or not enable the server function.
Default: [Active]
Install Server Certificate
You can install a server certificate for SSL communication.
Initialize Screen Features Settings
You can initialize the Screen Features settings, and the home screen settings and browser settings of the Smart Operation Panel.
Function Priority
Specify the mode to be displayed automatically after the operation switch is turned on or when System Reset mode is turned on. You can select one of the following modes:
Home
Web Browser
Quick Copy
Quick Fax
Scan to Me
Quick Scanner
Address Book Management
Copier
Document Server
Fax
Printer
Scanner
Browser
Embedded software applications
Default: [Home]
Contact your sales or service representative to use this function.
