Previous
Configuration:
Desktop
Hard disk:
320 GB
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Laser beam scanning and electro-photographic printing
Development:
Dry two-component magnetic brush development system
Fusing:
Direct Heating (DH) fusing
Resolution:
Scanning originals: 600 dpi
Printing: 600 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C (73.4°F), rated voltage)
(mainly Europe)When using a model with the standard operation panel
Model equipped with copy functions as standard: 11 seconds
Model equipped with scanner and printer functions as standard: 14 seconds
When using a model with the Smart Operation Panel
71 seconds
- (mainly Asia)
Model equipped with copy functions as standard: 11 seconds
Model equipped with scanner and printer functions as standard: 14 seconds
(mainly North America)14 seconds
Originals:
Sheet, book, three-dimensional object
Maximum original size:
- (mainly Europe and Asia)
A3
- (mainly North America)
11 × 17
Paper size:
Trays 1–2 and the bypass tray:
For details, see Recommended Paper Sizes and Types.
Duplex:
A3
, A4
, A5, A6, B4 JIS, B5 JIS, B6 JIS,11 × 17
, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 12 × 18, 11 × 15, 10 × 14Duplex (custom size):
Vertical: 90.0–297.0 mm (3.55–11.69 inches)
Horizontal: 148.0–431.8 mm (5.83–17.00 inches)
Paper weight:
Trays 1–2 and the bypass tray: For details, see Recommended Paper Sizes and Types.
Duplex: 52–256 g/m2 (14 lb. Bond–140 lb. Index)
For details about and recommendations concerning thick paper, see Thick paper.
Missing image area (Copier):
For details, see Missing image area.
First copy/print time:
Type 1: 4.5 seconds
Type 2: 4.5 seconds
Type 3: 4.3 seconds
Type 4: 4.0 seconds
Type 5: 2.9 seconds
Type 6: 2.9 seconds
(A4, 81/2 × 11, 100% reproduction, feeding from Tray 1, on the exposure glass)
Copy/print speed (A4, 81/2 × 11):
Type 1: 25 sheets/minute
Type 2: 30 sheets/minute
Type 3: 35 sheets/minute
Type 4: 40 sheets/minute
Type 5: 50 sheets/minute
Type 6: 60 sheets/minute
Reproduction ratio:
- (mainly Europe and Asia)
Preset reproduction ratios (%):
Enlargement: 400, 200, 141, 122, 115
Full size: 100
Reduction: 93, 82, 75, 71, 65, 50, 25
- (mainly North America)
Preset reproduction ratios (%):
Enlargement: 400, 200, 155, 129, 121
Full size: 100
Reduction: 93, 85, 78, 73, 65, 50, 25
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see Recommended Paper Sizes and Types.
Power requirements:
- (mainly Europe and Asia)
220–240 V, 8 A, 50/60 Hz
- (mainly North America)
120–127 V, 12 A, 60 Hz
Power consumption:
- (mainly Europe and Asia)
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Ready
54.6 W
54.6 W
54.6 W
81.4 W
81.4 W
81.4 W
During printing
513 W
513 W
513 W
822 W
822 W
822 W
Maximum
1,600 W or less
1,600 W or less
1,600 W or less
1,780 W or less
1,780 W or less
1,780 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1, 2, 3
Type 4, 5, 6
Maximum
1,600 W or less
1,780 W or less
The complete system of Type 1, 2, 3 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3150, fax unit, two extra G3 interface unit, and wireless LAN board.
The complete system of Type 4 and 5 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3170, fax unit, two extra G3 interface unit, and wireless LAN board.
The complete system of Type 6 consists of the main unit, one-pass duplex scanning ADF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3170, fax unit, two extra G3 interface unit, and wireless LAN board.
- (mainly North America)
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Ready
82.8 W
82.8 W
82.8 W
82.8 W
82.8 W
82.8 W
During printing
513 W
513 W
513 W
822 W
822 W
822 W
Maximum
1,600 W or less
1,600 W or less
1,600 W or less
1,600 W or less
1,600 W or less
1,600 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1, 2, 3
Type 4, 5, 6
Maximum
1,600 W or less
1,600 W or less
The complete system of Type 1, 2, 3 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3150, fax unit, two extra G3 interface unit, and wireless LAN board.
The complete system of Type 4 and 5 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3170, fax unit, two extra G3 interface unit, and wireless LAN board.
The complete system of Type 6 consists of the main unit, one-pass duplex scanning ADF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3170, fax unit, two extra G3 interface unit, and wireless LAN board.
Dimensions (W × D × H) (when the control panel is tilted by 77°):
- (mainly Europe)
Models equipped with the ARDF (W × D × H up to ARDF):
587 × 662 × 913 mm (23.2 × 26.1 × 36.0 inches)
Models equipped with the one-pass duplex scanning ADF (W × D × H up to one-pass duplex scanning ADF):
587 × 662 × 963 mm (23.2 × 26.1 × 38.0 inches)
- (mainly Asia)
Type 1, 2, 3, 4, 5 (W × D × H up to exposure glass):
587 × 662 ×788 mm (23.2 × 26.1 × 31.1 inches)
Type 6 (W × D × H up to one-pass duplex scanning ADF):
587 × 662 × 963 mm (23.2 × 26.1 × 38.0 inches)
- (mainly North America)
Type 1, 2, 3 (W × D × H up to ARDF):
587 × 662 × 913 mm (23.2 × 26.1 × 36.0 inches)
Type 4, 5, 6 (W × D × H up to one-pass duplex scanning ADF):
587 × 662 × 963 mm (23.2 × 26.1 × 38.0 inches)
Space for main unit (W × D) (including the paper trays, bypass tray, and output trays):
Models equipped with the ARDF: 1,149 × 1,160 mm (45.3 × 45.7 inches)
Models equipped with the one-pass duplex scanning ADF: 1,149 × 1,205 mm (45.3 × 47.5 inches)
Main unit without the ADF: 1,149 ×1,104 mm (45.3 × 43.5 inches)
Noise emission:
Sound power level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Stand-by
31.7 dB (A)
31.8 dB (A)
31.7 dB (A)
32.2 dB (A)
32.3 dB (A)
32.7 dB (A)
Copying
59.5 dB (A)
59.7 dB (A)
61.0 dB (A)
62.2 dB (A)
64.2 dB (A)
64.9 dB (A)
Complete system
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Stand-by
32.2 dB (A)
32.2 dB (A)
32.4 dB (A)
32.4 dB (A)
32.3 dB (A)
32.4 dB (A)
Copying
68.2 dB (A)
69.1 dB (A)
71.2 dB (A)
70.3 dB (A)
71.4 dB (A)
71.1 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Stand-by
19.5 dB (A)
18.9 dB (A)
19.7 dB (A)
19.6 dB (A)
19.5 dB (A)
19.5 dB (A)
Copying
47.2 dB (A)
47.6 dB (A)
48.9 dB (A)
50.5 dB (A)
52.8 dB (A)
53.2 dB (A)
Complete system
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Stand-by
18.5 dB (A)
18.6 dB (A)
18.6 dB (A)
18.4 dB (A)
18.5 dB (A)
18.6 dB (A)
Copying
55.0 dB (A)
55.6 dB (A)
58.6 dB (A)
55.6 dB (A)
56.6 dB (A)
57.9 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system of Type 1, 2, and 3 consists of the main unit, ARDF, lower paper trays, bridge unit, and Booklet Finisher SR3150.
The complete system of Type 4 and 5 consists of the main unit, ARDF, lower paper trays, bridge unit, and Booklet Finisher SR3170.
The complete system of Type 6 consists of the main unit, one-pass duplex scanning ADF, lower paper trays, bridge unit, and Booklet Finisher SR3170.
Weight:
- (mainly Europe)
Models equipped with the ARDF: Approx. 69 kg (152.2 lb.)
Models equipped with the one-pass duplex scanning ADF: Approx. 74 kg (163.2 lb.)
- (mainly Asia)
Type 1, 2, 3, 4, 5: Approx. 60 kg (132.3 lb.)
Type 6: Approx. 74 kg (163.2 lb.)
- (mainly North America)
Type 1, 2, 3: Approx. 69 kg (152.2 lb.)
Type 4, 5, 6: Approx. 74 kg (163.2 lb.)
