Previous
Using Immediate Transmission, you can send documents while checking the connection to the destination.
You can specify fax or IP-Fax destinations.
If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the transmission mode is automatically switched to Memory Transmission.
It is recommended that you call the receivers and confirm with them when sending important documents.
Display the initial facsimile screen.
When using the standard operation panel
Press the [Home] key on the top left of the control panel, and press the [Facsimile] icon on the [Home] screen.
When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [Fax] icon on the Home screen 4.
Make sure "Ready" appears on the screen.
Press [Immed. TX].
Place the original into the ADF.
Select the scan settings you require.
For details about the scan settings, see Scan Settings.
Specify a destination.
If you make a mistake, press the [Clear] key, and then enter again.
For details about specifying a destination, see Specifying a Destination.
Press the [Start] key.
