General Features

You can select whether Auto Image Density is "on" or "off" when the machine is turned off, reset, or modes are cleared.

Default for [Photo]: [Off]

Default for [Non-photo]: [On]

You can specify which original photo type has priority when you select [Text / Photo] or [Photo].

Default for [Text / Photo]: [Printed Photo]

Default for [Photo]: [Printed Photo]

You can have the original types shown on the initial screen.

Default: [Display]

If you select [Hide], the screen is as below.

You can choose to have the available paper trays and sizes shown on the initial screen.

Default: [Display]

If you select [Hide], the screen is shown as below.

When you cancel [Auto Paper Select], the sizes of paper loaded in the trays are displayed.

You can select the orientation of the originals when copying two-sided originals.

Default: [Top to Top]

You can select the orientation of the copies when making two-sided copies.

Default: [Top to Top]

The maximum copy quantity can be entered between 1 and 999.

Default: [999 sheet(s)]

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when [Auto Paper Select] is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.

Default: [With Image Rotation]

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size and in the same orientation, copying is interrupted and the message that prompts you to add paper to the tray will be displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message that prompts you to add paper to the tray will be displayed.

You can select whether to use a buzzer to alert you when you forget to remove an original.

Default: [On]

If [Panel Key Sound] of [General Features] ([System Settings]) is turned off, this function is invalidated even if it is turned on.

You can select whether or not to sound a buzzer when a copy is completed.

If [Panel Key Sound] of [General Features] ([System Settings]) is turned on, the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.

Default: [On]

You can assign up to 6 frequently-used functions to the shortcut keys.

Default for "Customize Function: Copier 1": [1 sided 2 sided:TtoT]

Default for "Customize Function: Copier 2": [2 sided 2 sided]

Default for "Customize Function: Copier 3": [1 sided Comb 2 orig]

Default for "Customize Function: Copier 4": [1 sided Comb 4 orig]

Default for "Customize Function: Copier 5": [Create Margin]

Default for "Customize Function: Copier 6": [ID Card Copy]

You can assign up to 6 frequently-used functions for scanning documents on the shortcut keys.

Default for "Customize Function: Document Server Storage 1": [2 Sided Orig. Top to Top]

Default for "Customize Function: Document Server Storage 2": [1 sided Comb 2 orig]

Default for "Customize Function: Document Server Storage 3": [1 sided Comb 4 orig]

Default for "Customize Function: Document Server Storage 4": [1 sided Comb 8 orig]

Default for "Customize Function: Document Server Storage 5": [Create Margin]

Default for "Customize Function: Document Server Storage 6": [Off]

You can specify whether or not to display the setting screen for paper sizes or types whenever you press [].

If you select [Display Automatically], the paper setting screen is displayed whenever you press []. If you select [Do not Display], the paper setting screen is displayed when you press [] and the [] key.

Default: [Display Automatically]