Skip header
 

Erase Border

Erases the edge margin of the original image.

There are two types in the Erase Border mode.

Same Width

Erase the same width of edge margins of the original image.

Different Width

Erase the edge margins of the original image at different widths.

1Press [Edit / Stamp].

Operation panel screen illustration

2Press [Erase].

3Press [Erase Center / Border].

4Make sure that [Erase Border] is selected.

5Select [Same Width] or [Different Width].

6Specify an erase border width with [Plus] and [Minus].

If [Same Width] is selected in Step 5:

Operation panel screen illustration

If [Different Width] is selected in Step 5:

Operation panel screen illustration

Press the key that you want to change, and then specify a new value.

7Press [OK] twice.

Note

  • Pressing [Plus] or [Minus] changes the width in increments of 1 mm (0.1 inches). Pressing and holding down the relevant key changes the width in increments of 10 mm (1 inch).