Skip header
 

Setting Up as a Print Server

This section describes the setting procedure for network printers in the NetWare environment. In the NetWare environment, you can connect the machine as a "print server" or "remote printer".

Important

  • Netware is inactive in the default setting. Activate Netware in "Interface Settings" on the machine.

  • IPv6 cannot be used on this function.

Note

  • This function supports NetWare 6.5.

  • This procedure assumes an environment is already prepared for normal NetWare running the printing service setting.

  • The procedure is explained with the following example settings:

    • File server's name ...CAREE

    • Print server's name ...PSERV

    • Printer's name ...R-PRN

    • Queue name ...R-QUEUE

PreviousNext