Top Page > DHCP Option 204 > Appendix > Checking System Log Information > System Log Information

System Log Information

Use the following commands to display the system log information:

UNIX: Use the "syslog" parameter and the "rsh", "rcp", "ftp", and "sftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.
telnet: Enter the following command:
msh> syslog

Messages	Causes and solutions
Auto-configuration process internal ERROR.	An internal error occurred while setting updates were performed by the DHCP or TFTP function.
Auto-configuration process is started.	Setting updates are being performed by the DHCP or TFTP function.
Config-file is downloaded from <an IP address or file name>	The network settings file was downloaded.
Failed to change network settings: <parameter>	The setting displayed in <parameter> was not specified. Check the network settings file configuration. For details about the items and values you can specify, see File Format of the Network Settings File.
Failed to download config-file: <an IP address or file name>	The network settings file was not downloaded. Check if TFTP is enabled on the DHCP server. Check if the name and size of the file is correct. For details about the file format, see File Format of the Network Settings File.
Failed to download PJL-file from TFTP server.	The printer settings file was not downloaded. Check if TFTP is enabled on the DHCP server. Check if the name and size of the file is correct. For details about the file format, see File Format of the Printer Settings File.
Failed to transfer PJL-file to printer.	The printer settings file was not sent. Check if DIPRINT is enabled.
Fileformat is unmatched.<cause>	The file format is not correct. The following items are displayed in <cause>. Check the displayed message and the file format. CharCode: Character codes other than ASCII or UTF-8 were used. Use ASCII or UTF-8 only. CR: Only CR was used as a line feed code. Use CR + LF or LF.
Network settings are changed.	The network settings were changed.
Network settings are not changed.	No changes to the network settings were required.
PJL-file is downloaded from TFTP server.	The printer settings file was downloaded.
PJL-file is transferred to printer.	The printer settings file was sent.
PJL-filename is not specified.	The name of the printer settings file is not specified in the network settings file. Check if the name of the printer settings file is specified in the network settings file.
rconfig process is canceled.	rconfig is a remote setting process. The download of settings files or network setting in rconfig were canceled. Check if the settings were changed by something other than DHCP Option 204 while rconfig was running.