TCP/IP

ipp.timeout = {30–65535}

Specify the time interval (seconds) to cancel the print job when using WSD (Printer) or IPP.

slp.ttl = {1–255}

Specify the number of routers that SLP packets can pass through.

set.ftp = {1|0}

Enable or disable FTP.

• 1: Enable

• 0: Disable

set.lpr = {1|0}

Enable or disable LPR.

• 1: Enable

• 0: Disable

set.rsh = {1|0}

Enable or disable RSH.

• 1: Enable

• 0: Disable

set.telnet = {1|0}

Enable or disable Telnet.

• 1: Enable

• 0: Disable

set.web = {1|0}

Enable or disable the web protocol.

• 1: Enable

• 0: Disable

set.snmp = {1|0}

Enable or disable SNMP.

• 1: Enable

• 0: Disable

set.ipp = {1|0}

Enable or disable IPP.

• 1: Enable

• 0: Disable

set.http = {1|0}

Enable or disable HTTP.

• 1: Enable

• 0: Disable

set.bonjour = {1|0}

Enable or disable the Bonjour protocol.

• 1: Enable

• 0: Disable

set.ssl = {1|0}

Enable or disable SSL.

• 1: Enable

• 0: Disable

set.nrs = {1|0}

Enable or disable NRS.

• 1: Enable

• 0: Disable

set.rfu = {1|0}

Enable or disable RFU.

• 1: Enable

• 0: Disable

set.nbt = {1|0}

Enable or disable NBT.

• 1: Enable

• 0: Disable

set.ssdp = {1|0}

Enable or disable SSDP.

• 1: Enable

• 0: Disable

set.ssh = {1|0}

Enable or disable SSH.

• 1: Enable

• 0: Disable

set.sftp = {1|0}

Enable or disable SFTP.

• 1: Enable

• 0: Disable

set.wsdev = {1|0}

Enable or disable WSD (Device).

• 1: Enable

• 0: Disable

set.wsprn = {1|0}

Enable or disable WSD (Printer).

• 1: Enable

• 0: Disable

set.wsscn = {1|0}

Enable or disable WSD (Scanner).

• 1: Enable

• 0: Disable

set.ipds = {1|0}

Enable or disable IPDS.

• 1: Enable

• 0: Disable

set.rhpp = {1|0}

Enable or disable RHPP.

• 1: Enable

• 0: Disable

set.llmnr = {1|0}

Enable or disable LLMNR.

• 1: Enable

• 0: Disable

set.llmnrc = {1|0}

Enable or disable LLMNRC.

• 1: Enable

• 0: Disable

set.lltd = {1|0}

Enable or disable LLTD.

• 1: Enable

• 0: Disable

wins = {1|0}

Enable or disable the WINS server settings.

• 1: Enable

• 0: Disable

autonet = {1|0}

Enable or disable the AutoNet settings.

• 1: Enable

• 0: Disable

sntp.interval = {0, 15–10080}

Specify the time interval (minutes) to synchronize with the specified NTP server when using SNTP.

diprint.bidirect = {1|0}

Enable or disable bidirectional communication settings when using RAW in DIPRINT.

• 1: Enable

• 0: Disable

dns.ddns = {1|0}

Enable or disable the dynamic DNS function.

• 1: Enable

• 0: Disable

dns.overlap = {1|0}

Specify the behavior when DNS records are overlapped.

• 1: Overwrite

• 0: Add a new record

dns.arecord = {1|0}

Specify whether or not to register an A record of the DHCP server when using the dynamic DNS function.

• 1: Register

• 0: Do not register

dns.cname = {1|0}

Specify whether or not to register CNAME of the machine when using the dynamic DNS function.

• 1: Register

• 0: Do not register

dns.interval = {1–255}

Specify the time interval (hours) to update the registered records when using the dynamic DNS function.

diprint.conn = {1|0}

Specify the number of concurrent connections using DIPRINT.

• 1: Multiple

• 0: Single

ssh.compression = {1|0}

Specify whether or not to compress data when sending it in the SSH/SFTP communication.

• 1: Compress

• 0: Do not compress

ssh.port = {22, 1024–65535}

Specify the port number in the SSH/SFTP communication.

ssh.timeout = {0–65535}

Specify the time interval (seconds) to cancel the SSH/SFTP communication.

ssh.logintimeout = {0–65535}

Specify the time interval (seconds) to stop logging in with the SSH/SFTP communication.

access.<registry number>.range.from = {0.0.0.0–255.255.255.255}

Specify the starting IPv4 address such as 0.0.0.0, 0.0.0.200, etc.

You can specify up to five IPv4 address ranges for the registry number by using numerals from 1 to 5.

access.<registry number>.range.to = {0.0.0.0–255.255.255.255}

Specify an ending IPv4 address that is compatible with the starting IPv4 address.

You can specify up to five IPv4 address ranges for the registry number by using numerals from 1 to 5.

web.<registry number>.url = <text>

Specify a URL to be displayed as a link on Web Image Monitor using up to 127 bytes.

You can specify up to two links for the registry number by using numerals 1 and 2.

You can only use ASCII (0x21-0x7e) characters.

Do not use spaces.

web.<registry number>.name = <text>

Specify the name of a URL to be displayed as a link on Web Image Monitor using up to 31 bytes.

You can specify up to two names for the registry number by using numerals 1 and 2.

web.help = <text>

Specify a URL to be displayed as help on Web Image Monitor using up to 127 bytes.

You can only use ASCII (0x21-0x7e) characters.

Do not use spaces.

lpr.chkhost = {1|0}

To determine that the IP address that sent a print job and the IP address that requests deletion of the job are the same, specify either of the following by using LPR.

• 1: Judge

• 0: Do not judge

pathmtu = {1|0}

Enable or disable the PathMTU Discovery service function.

• 1: Enable

• 0: Disable

lpr.prnerrchk = {1|0}

Enable or disable the function to detect an error that occurs in the printer when LRP is used.

• 1: Enable

• 0: Disable

ipds.port = {1024–65535}

Specify the port number in the IPDS communication.

You cannot specify 2501, 2601, or 9100.

ipds.timeout = {0, 30–65535}

Specify the time interval (seconds) to cancel the IPDS communication.

rhpp.port = {1024–65535}

Specify the port number in the RHPP communication.

rhpp.timeout = {30–65535}

Specify the time interval (seconds) to cancel the RHPP communication.

http.keepalive = {1|0}

Enable or disable the Keep-Alive configuration in HTTP communication.

• 1: Enable

• 0: Disable

http.keepalive_timeout = {1–255}

Specify the time interval (seconds) to cancel the Keep-Alive configuration in the HTTP communication.

diprint.timeout = {30–65535}

Specify the time interval (seconds) to cancel the DIPRINT communication.