Press the [User Tools] key.
Press [Login].
Enter the login password, and then press the [OK] key.
Press the [] or [] key to display [System Settings], and then press the [OK] key.
Press the [] or [] key to display [Administrator Tools], and then press the [OK] key.
Press the [] or [] key to display [Address Book Management], and then press the [OK] key.
Press the [] or [] key to display [Program/Change], and then press the [OK] key.
Enter the registration number you want to program using the number keys, and then press the [OK] key.
You can automatically specify registration numbers 001-020 by pressing the Quick Dial keys.
Press [Search] to search by name, display destination list, registration No., fax destination, e-mail address, or folder name.
Enter the name, and then press the [OK] key.
You can enter a name of up to 20 characters.
Press [Dest.].
Press the [] or [] key to display [Folder Info], and then press the [OK] key.
Press the [] or [] key to display [FTP], and then press the [OK] key.
Enter the server name, and then press the [OK] key.
If you want to change the port number, enter the new port number, and then press the [OK] key.
You can enter 1 to 65535.
If you want to change the path, enter the new path, and then press the [OK] key.
You can enter an absolute path, using this format: "/user/ home/username"; or a relative path, using this format: directory/sub-directory".
You can enter a path using up to 128 characters.
If you leave the path blank, the login directory is assumed to be the current working directory.
You can also enter an IPv4 address.
Press [Com.Test] to check the path is set correctly.
If the connection test fails, check the settings, and then try again.
Press [Exit].
Press the [Escape] key.
Press the [] or [] key to display [Auth. Info], and then press the [OK] key.
Press the [] or [] key to display [Folder Authentication], and then press the [OK] key.
Press the [] or [] key to display [Specify Other Auth. Info], and then press [User].
When [Do not Specify] is selected, the [FTP User Name] and [FTP Password] that you have specified in "Default User Name/PW(Send)" of [File Transfer] settings applies. For details, see File Transfer.
Enter the login user name, and then press the [OK] key.
Press [Password].
Enter the password, and then press the [OK] key.
Enter the password again to confirm, and then press the [OK] key.
Press the [OK] key.
Press the [Escape] key.
Press [Exit].
Press the [OK] key.
Press the [Escape] key.
You can enter up to 20 characters for the user name.
You can enter up to 20 characters for the password.
For details about entering text, see Entering Characters.