Scan Settings
This section describes the user tools in the [Scan Settings] menu under [Scanner Features].
Next Orig.:Exposure Glass
If you want to divide your originals and scan them separately using the exposure glass and then send them together as a single job, select [Continuous Wait], [Off], or [Set Wait Time] as the waiting status.
Continuous Wait
Off
Set Wait Time
Default: [Set Wait Time], [60 sec.]
If [Off] is selected, the machine forwards the scan data as soon as it finishes scanning each original.
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals with the number keys. Scanning will start if additional originals are placed and the [B&W Start] or [Color Start] key is pressed within this time. You can end scanning and begin transmission by pressing the [
] key within this time. Once the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for additional originals until the [] key is pressed. Scanning will start when additional originals are placed and the [B&W Start] or [Color Start] key is pressed. You can end scanning and begin sending by pressing the [] key.
If originals are placed in the ADF, transmission will start without waiting for additional originals after all originals in the ADF have been scanned, regardless of the specified settings.
Auto Image Dens. Priority
You can set whether auto density is "On" or "Off" when the machine is turned on, reset, or modes are cleared. "Auto Image Dens. Priority" can be used only if scanning in black-and-white mode is enabled and "Original Type" is set to "Text".
Default: [On]
ADS Background(Full Clr.)
Characteristics due to the type of paper such as nonwhiteness like newspaper or transparent originals can be reduced by correcting the scanning density.
Default: [3] (the halfway/medium setting)
