Skip header
Help
 

Using the Fax Function (SG 3110SFNw only) > Sending a Fax > Useful Sending Functions > Sending at a specific time (Send Later)

Sending at a specific time (Send Later)

Using this function, you can instruct the machine to delay transmission of your fax document until a specified later time.

This allows you to take advantage of off-peak telephone charges without having to be by the machine at the time.

Important

  • This function is unavailable with Immediate Transmission.

1Press the [Facsimile] key.

2Press [TX Mode].

3Press the [Up arrow key] or [Down arrow key] key to display [Send Later], and then press the [OK] key.

4Press the [Up arrow key] or [Down arrow key] key to display [Send at Specified Time], and then press the [OK] key.

To cancel the setting, select [Off], and then press the [OK] key.

5Enter the time (24 hour format) using the number keys, and then press the [OK] key.

When entering numbers smaller than 10, add a zero at the beginning.

If you make a mistake, press the [Clear/Stop] key, before pressing the [OK] key.

6Press the [Escape] key.

7Specify a destination, and then press the [B&W Start] key.

Note

  • You can specify a time within 24 hours of the current time.

  • You can cancel the transmission setup for Send Later. See Canceling a fax.