The following procedure uses Windows 7 and Presto! PageManager as an example.
The procedure may vary depending on Presto! PageManager's version. For details, see the manual for Presto! PageManager.
Place the original on the exposure glass or in the ADF.
On the [Start] menu, point to [All Programs], point to [Presto! PageManager X.XX], and then click [Presto! PageManager X.XX].
"X.XX" indicates the version of Presto! PageManager.
On the [File] menu, click [Select Source...].
In the [Select Source] dialog box, select the scanner, and then click [OK].
On the [Tools] menu, click [Scan Central Settings...].
Configure the scan settings as required, and then click [OK].
For details, see the manual for Presto! PageManager.
On the [File] menu, click [Acquire Image Data...].
In [Original Scan Method:], select [Exposure Glass] (when using the exposure glass) or [ADF] (when using the ADF).
Click [Scan].
On the [File] menu, click [Exit].
If there are two or more scanners on the network, make sure you have selected the correct scanner. If you have not, click [Select Source...] on the [File] menu, and select the scanner again.
You can use the launcher installed with Presto! PageManager to perform the following scan operations easily. For more details, see the manual for Presto! PageManager.
Scanning originals into another application.
Passing the scanned files to an OCR application.
Passing the scanned files to an e-mail application to send as attachments.
Saving the scanned files in a preset folder.