Skip header
Help
 

Using the Printer Function > Printing

Printing

Important

  • If you print on glossy paper, be sure to remove each sheet as it is delivered to the output ramp.

1Load paper into paper tray.

How to load paper depends on the paper type. See Loadable Paper Sizes and Quantities.

2Open the [Printing Preferences] dialog box from the application.

See Opening from an Application.

3Click the [One Click Presets] tab.

4Select the paper type from the [Paper Type:] list.

If you select [Inkjet Plain Paper], the machine will print on one side only. To print on both sides, select [Plain].

If necessary, specify different printer settings.

5Click [OK].

Note

  • For details about specifying print settings, see the printer driver Help.

  • For details about the number of sheets that you can load in the paper tray and that can be stacked on the output ramp, see Paper type precautions.

  • For precautions on handling paper, see Loading precautions.

  • For details about the printable area of a sheet, see Printable area.

  • When printing on both sides, content other than text is printed at lower density.

  • If ink smears appear and characters are not properly formed when printing white text on a black background, select [High Speed] or [Speed Priority] in the [Select Print Quality:], and then print the job again.

  • Under the PCL driver, the available custom size is 127.0-355.9 mm (5.00-14.01 inches) (Vertical) × 55.0-216.0 mm (2.17-8.50 inches) (Horizontal).