Skip header
Help
 

Using the SmartDeviceMonitor for client port

This section explains how to install the printer driver (TCP/IP) and set up the SmartDeviceMonitor for Client port.

Important

  • For a 64-bit operating system, bidirectional communication is not possible if the SmartDeviceMonitor port is used. In such a case, it is recommended to use the Standard TCP/IP Port.

  • Only administrators can perform this installation. Log on as a member of the Administrators group.

  • To use the SmartDeviceMonitor for Client port, you need to download SmartDeviceMonitor for Client from the manufacturer's Web site. See Downloading Utility Software.

1Insert the CD-ROM in the CD-ROM drive.

Quit all applications currently running.

2Select an interface language, and then click [OK].

3Click [PCL/RPCS Raster Printer Drivers] or [Printer Driver].

4Read the entire license agreement carefully. If you accept its terms, click [I accept the agreement.], and then click [Next >].

5Select the program you want to use, and then click [Next >]. (SG 3110SFNw)

Click [Connect to a printer port or LAN], and then click [Next >]. (SG 3100SNw)

  • To search for printers automatically, select [Search for printers automatically], and then follow the wizard's instructions.

  • To search for a printer by its IP address, select [Search for printers by specified IP Address], and then follow the wizard's instructions.

  • If you do not search for a printer, select [Do not search]. In this example procedure, [Do not search] is selected.

6Select the model of printer you want to use.

7Click [+] to display the printer settings.

8Click [ Port:], and then click [Add].

9Click [SmartDeviceMonitor], and then click [OK].

10Select [TCP/IP], and then click [Search].

A list of printers using TCP/IP appears.

11Select the printer you want to use, and then click [OK].

If the printer you want to use does not appear, click [Specify address], and then enter the machine's IP address or host name.

12If necessary, configure the default printer.

13If necessary, configure the setting for sharing the printer.

14Click [Continue].

The printer driver installation starts.

15If you want to make initial settings for the printer, click [Set Now] or [OK].

16Make initial settings, and then click [OK].

17Select whether or not to open the Status Monitor automatically, and then click [Next >].

18Click [Finish].

If a dialog box asking whether you want to restart now appears, select [Yes, restart now.], and then click [Finish].

Note

  • Although the Windows security warning may appear during installation, ignore it and continue with the installation.

  • A message appears if there is a newer version of the printer driver already installed. If this is the case, you cannot install the printer driver using Auto Run. See If a Message Appears during Installation.