Skip header
Help
 

Preparing for Printing > Installing the Print Cartridges

Installing the Print Cartridges

CAUTION

  • Keep ink and ink containers out of reach of children.

  • If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if necessary.

  • If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

  • When removing jammed paper or replacing ink, avoid getting ink on your clothing. If ink comes into contact with your clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and make removing the stain impossible.

  • When removing jammed paper or replacing ink, avoid getting ink on your skin. If ink comes into contact with your skin, wash the affected area thoroughly with soap and water.

  • When removing the print cartridge, avoid putting your hand near the place where the print cartridge is installed. If ink comes in contact with your hands, wash them thoroughly with soap and water.

Important

  • When installing the print cartridge, do not touch the inside of the machine.

  • Do not turn the machine on until you have read how to do so.

    machine body illustration

  • Be sure to install the unused print cartridge that is supplied. Installing any other cartridge could result in incomplete ink filling and malfunction.

1Remove the packaging from the print cartridges.

Do not touch the ink supply ports or silicon substrates of print cartridges.

2Open the right front cover.

machine body illustration

3Check the orientation of each cartridge, and then install them gently.

machine body illustration

Install in the following order from the left: black, cyan, magenta, and yellow.

4Push in each cartridge.

5Repeat steps 3 to 4 for all four cartridges.

6Close the right front cover.

machine body illustration