Status of Functions under Each Network Security Level

TCP/IP

Function	Level 0	Level 1	FIPS 140	Level 2
TCP/IP	Active	Active	Active	Active
HTTP > Port 80	Open	Open	Open	Open
IPP > Port 80	Open	Open	Open	Open
IPP > Port 631	Open	Open	Close	Close
SSL/TLS > Port 443	Open	Open	Open	Open
SSL/TLS > Permit SSL/TLS Communication	Ciphertext Priority	Ciphertext Priority	Ciphertext Only	Ciphertext Only
SSL/TLS Version > TLS1.2	Active	Active	Active	Active
SSL/TLS Version > TLS1.1	Active	Active	Active	Active
SSL/TLS Version > TLS1.0	Active	Active	Active	Active
SSL/TLS Version > SSL3.0	Active	Active	Inactive	Inactive
Encryption Strength Setting > AES	128bit/256bit	128bit/256bit	128bit/256bit	128bit/256bit
Encryption Strength Setting > 3DES	168bit	168bit	168bit	-
Encryption Strength Setting > RC4	-	-	-	-
DIPRINT	Active	Active	Inactive	Inactive
LPR	Active	Active	Inactive	Inactive
FTP	Active	Active	Active	Active
sftp	Active	Active	Active	Active
ssh	Active	Active	Active	Active
RSH/RCP	Active	Active	Inactive	Inactive
TELNET	Active	Inactive	Inactive	Inactive
Bonjour	Active	Active	Inactive	Inactive
SSDP	Active	Active	Inactive	Inactive
SMB	Active	Active	Inactive	Inactive
NetBIOS over TCP/IPv4	Active	Active	Inactive	Inactive
WSD (Device)	Active	Active	Active	Active
WSD (Printer)	Active	Active	Active	Active
WSD (Scanner)/DSM	Active	Active	Active	Active
WSD (Encrypted Communication of Device)	Inactive	Inactive	Active	Active
RHPP	Active	Active	Inactive	Inactive

The same settings are applied to IPv4 and IPv6.

TCP/IP setting is not controlled by the security level. Manually specify whether to enable or disable this setting.

NetWare

Function	Level 0	Level 1	FIPS 140	Level 2
NetWare	Active	Active	Inactive	Inactive

If NetWare is not used on your network, the above settings are not applicable.

SNMP

Function	Level 0	Level 1	FIPS 140	Level 2
SNMP	Active	Active	Active	Active
Permit Settings by SNMPv1 and v2	On	Off	Off	Off
SNMPv1,v2 Function	Active	Active	Inactive	Inactive
SNMPv3 Function	Active	Active	Active	Active
Permit SNMPv3 Communication	Encryption/Cleartext	Encryption/Cleartext	Encryption Only	Encryption Only

TCP/IP Encryption Strength Setting

Function	Level 0	Level 1	FIPS 140	Level 2
ssh > Encryption Algorithm	DES/3DES/AES-128/AES-192/AES-256/Blowfish/Arcfour	3DES/AES-128/AES-192/AES-256/Arcfour	3DES/AES-128/AES-192/AES-256	3DES/AES-128/AES-192/AES-256
S/MIME > Encryption Algorithm	3DES-168 bit	3DES-168 bit	3DES-168 bit	AES-256 bit
S/MIME > Digest Algorithm	SHA1	SHA1	SHA1	SHA-256 bit
SNMPv3 > Authentication Algorithm	MD5	SHA1	SHA1	SHA1
SNMPv3 > Encryption Algorithm	DES	DES	AES-128	AES-128
Kerberos Authentication > Encryption Algorithm	AES256-CTS-HMAC-SHA1-96/AES128-CTS-HMAC-SHA1-96/DES3-CBC-SHA1/RC4-HMAC/DES-CBC-MD5	AES256-CTS-HMAC-SHA1-96/AES128-CTS-HMAC-SHA1-96/DES3-CBC-SHA1/RC4-HMAC	AES256-CTS-HMAC-SHA1-96/AES128-CTS-HMAC-SHA1-96/DES3-CBC-SHA1	AES256-CTS-HMAC-SHA1-96/AES128-CTS-HMAC-SHA1-96
Driver Encryption Key > Encryption Strength	Simple Encryption	DES	AES	AES