Skip header
 

Basic Procedure for Sending Scan Files by E-mail

1Display the initial scanner screen.

  • When using the standard operation panel

    Press the [Home] key on the bottom left of the control panel, and press the [Scanner] icon on the [Home] screen.

    Home key illustration

  • When using the Smart Operation Panel

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [Scanner] icon on the Home screen 4.

2Make sure that no previous settings remain.

If a previous setting remains, press the [Reset] key.

3Press the [Email] tab.

Operation panel screen illustration

4Place originals.

5If necessary, specify the scan settings according to the original to be scanned.

Operation panel screen illustration

Example: Scanning the document in color/duplex mode, and saving as a PDF file.

  • Press [Scan Settings], and then press [Full Color: Text / Photo] in the [Original Type] tab.

  • Press [Original Feed Type], and then press [2 Sided Original].

  • Press [PDF] under [Send File Type / Name].

For information about other settings, see Various Scan Settings.

The settings explained in Entering the E-mail Subject, Entering the E-mail Message, Security Settings to E-mails can also be specified.

6Specify the destination.

You can specify multiple destinations.

For details, see Specifying the Destination or Recipient.

7Press [Sender Name], select the e-mail sender, and then press [OK].

For details, see Specifying the E-mail Sender.

8To use Message Disposition Notification, press [Recept. Notice].

If you select [Recept. Notice], the selected e-mail sender will receive e-mail notification when the e-mail recipient has opened the e-mail.

9Press the [Start] key.

Note

  • This machine supports SMTPS (SMTP over SSL).

  • This machine supports Web mail sending.

  • If [Auto Specify Sender Name] on the [File Transfer] tab under [System Settings] is set to [On], you can send e-mails without entering anything for [Sender Name]. For details, see "File Transfer", Connecting the Machine/ System Settings.

  • Depending on the security setting, the logged-in user may be specified as [Sender Name].

  • To use Message Disposition Notification, log in to the machine as a user and specify the sender. Note, however, that the [Recept. Notice] notification e-mail may not be transmitted if the e-mail software of the recipient does not support Message Disposition Notification.

  • If you press [Preview] and then start scanning while [Preview] is selected, the Preview screen appears. You can use this screen to check how the originals are scanned and the scan setting used for scanning. After checking the preview, you can specify whether to send the file or not. For detail, see "[Preview] screen under the scanner function", Getting Started.

  • To cancel scanning, press the [Stop] key. Check the information displayed in the dialog box, and then press any button.

  • You can also store a scan file and simultaneously send it by e-mail. For details, see Simultaneous Storage and Sending by E-mail.

  • After an e-mail is sent, the destination, sender, subject, text, and file name fields will be automatically cleared. If you want to preserve the information in these fields, contact your local dealer.

  • You cannot switch the screen while e-mail or other destinations are being specified. To clear the specified destination, display the destination in the destination field of each screen, and then press the [Clear] key.