Skip header
 

PictBridge Printing

1Check the machine and the digital camera are both switched on.

2Using a USB cable, connect the digital camera to the machine's USB host interface or the media slot.

For details about connecting the digital camera to the machine's USB host interface, see "Connecting a Device to the Machine's USB Host Interface", Connecting the Machine/ System Settings. For details about connecting the device via the media slot, see "Inserting/Removing a Memory Storage Device", Getting Started.

3On your digital camera, select the images you want to print, and specify the printing conditions.

4The machine receives settings from the digital camera and starts printing.

Note

  • Since printing conditions are specified on the digital camera, specifiable meters depend on the particular digital camera. For details, see your digital camera's manual.

  • Some digital cameras require settings for manual PictBridge operation. For details, see your digital camera's manual.

  • If you want to place the camera on the machine, we recommend you place it between the control panel and the ADF.

    Machine illustration