Skip header
 

Printing the remaining sets of the document

Important

  • When printing is completed, the stored file will be deleted.

1Display the initial printer screen.

  • When using the standard operation panel

    Press the [Home] key on the bottom left of the control panel, and press the [Printer] icon on the [Home] screen.

    Home key illustration

  • When using the Smart Operation Panel

    Press the [Home] key on the top left of the control panel, and then press the [Printer] icon on the Home screen 3.

2Press the [Print Jobs] tab.

Operation panel screen illustration

3Press [Sample Print Job].

4Select the files you want to print.

You can select all the Sample Print files at once by pressing [Select All Jobs] after selecting a file.

5If necessary, press [Preview] to check the print image of the document.

Only the first page of the document is displayed in the preview screen. No previews can be displayed when more than one document is selected.

Press [Exit] to close the preview screen.

6Press [Print].

7To change the print settings of the document, press [Detailed Settings].

For details about the settings that can be configured, see Settings That Can Be Configured on the Control Panel.

8Enter the number of copies using the number keys if necessary, and then press [Print].

Note

  • If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.

  • To stop printing after printing has started, press [Job Reset] on the [Printer] screen or the [Stop] key. The file will be deleted.

  • You can also print a Sample Print file from Web Image Monitor. For details, see Web Image Monitor Help.