Skip header
 

Print Area

The following shows the recommended print area for this machine.

Illustration of print area for paper

  1. Print area

  2. Feed direction

  3. Approx. 4.2 mm (0.17 inches)

  4. Approx. 4.2 mm (0.17 inches)

  5. Approx. 4.2 mm (0.17 inches)

  6. Approx. 4.2 mm (0.17 inches)

Note

  • The print area may vary depending on the paper size, printer language and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.

  • If [Edge to Edge Print] under [System] in [Printer Features] is enabled, the margins on the left, right, and bottom edges in relation to the feed direction will become 0 mm. However, toner smearing may occur on the back side or near the edges of the printed paper.

PreviousNext