Skip header
 

Standard Printing

Important

  • The default setting is 2 sided printing. If you want to print on only one side, select [Off] for the 2 sided printing setting.

  • If you send a print job via USB 2.0 while the machine is in Low Power mode or Sleep mode, an error message might appear when the print job is complete. In this case, check if the document was printed.

Note

  • When the virtual printer is set to [Active], the virtual printer settings are given priority if [Printer Default] in the "Output Tray:" list is selected in the printer driver. In order to give priority to the printer driver setting, select an output location other than [Printer Default].