Skip header
 

Registering an IP-Fax Destination

1Display the Address Book screen.

  • When using the standard operation panel

    Press the [Home] key on the bottom left of the control panel, and press the [Address Book Management] icon on the [Home] screen.

  • When using the Smart Operation Panel

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [Address Book Management] icon on the Home screen 4.

2Check that [Program / Change] is selected.

3Select the name whose IP-Fax destination you want to register.

Press the name key, or enter the registered number using the number keys.

4Press [Fax Dest.].

5Press [Select Line], and then select [H.323] or [SIP].

Operation panel screen illustration

6Press [OK].

7Press [Change] under "Fax Destination".

8Enter the IP-Fax destination.

9Press [OK].

10Press [OK].

11Close the Address Book screen.

  • When using the standard operation panel

    Press the [User Tools/Counter] key.

  • When using the Smart Operation Panel

    Press [User Tools/Counter] (Operation panel screen illustration) on the top right of the screen.

Note