Skip header
 

Changing an NCP Registered Folder

1Display the Address Book screen.

  • When using the standard operation panel

    Press the [Home] key on the bottom left of the control panel, and press the [Address Book Management] icon on the [Home] screen.

  • When using the Smart Operation Panel

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [Address Book Management] icon on the Home screen 4.

2Check that [Program / Change] is selected.

3Select the user of the registered folder you want to change.

Press the name key, or enter the registered number using the number keys.

You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.

4Press [Folder].

5Select "Connection Type".

If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a NetWare server, press [Bindery].

6Specify the folder.

To specify a folder, you can either enter the path manually or locate the folder by browsing the network.

7Press [Connection Test] to check the path is set correctly.

8Press [Exit].

9Press [OK].

10Close the Address Book screen.

  • When using the standard operation panel

    Press the [User Tools/Counter] key.

  • When using the Smart Operation Panel

    Press [User Tools/Counter] (Operation panel screen illustration) on the top right of the screen.

Note

  • NCP is available only when an optional NetWare unit is installed.

  • To change the name, key display and title, see Registering User Information.

Related topics

Changing the protocol