Skip header
 

Use the "dhcp6"command to display or configure DHCPv6 settings.

View settings

The following command displays the current DHCPv6 settings.

msh> dhcp6

DHCPv6 configuration and display

msh> dhcp6 {ether|wlan} {on|off}

Viewing and specifying operation mode for parameter acquisition

msh> dhcp6 mode {router|dhcpv6|dhcpv6lite}

Viewing and specifying the ID for the IPv6 address

msh> dhcp6 iaid {0–4294967295}

  • A value entered here ranges from 0 to 4294967295.

Viewing and specifying RFC compliant/noncompliant domain name

msh> dhcp6 encode rfc {on|off}

Viewing and specifying DNS server address selection (obtained from the dhcpv6 server/user specified value)

msh> dhcp6 dnsaddr {dhcp|static}

DUID (DHCP unique ID) deletion and display

msh> dhcp6 duid {clear}