Skip header
 

Changing the Default Functions of the Initial Screen

This section explains how to set defaults for the initial screen, which appears when the machine is turned on or when settings are cleared or reset.

The following settings can be registered as defaults:

Copier:

Color mode, original type, density, Original Settng, paper tray, Store File (except for User Name, File Name, Password, and Target Folder to Store), Auto Reduce / Enlarge, Create Margin, Finishing, Cover/Slip Sheet, Edit / Color, Dup./Combine/Series, Reduce / Enlarge, number of copies

Document Server:

  • Initial document print screen

    2 Sided Copy Top to Top, 2 Sided Copy Top to Bottom, Booklet, Magazine, Finishing, Cover/Slip Sheet (except for Main Sheet Tray in Designate / Chapter), Edit / Stamp, number of prints

  • Initial scan original screen

    Color mode, original type, density, Original Settng, paper tray, Auto Reduce / Enlarge, Create Margin, Edit / Color, Duplex/Combine, Reduce / Enlarge

Facsimile:

Scan Settings, density, Original Feed Type, File Type, Store File (except for User Name, File Name, and Password), Preview, transmission type, Select Line, memory transmission/immediate transmission, Communi. Result Rep., TX Mode (except for Subject)

Scanner:

Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security Settings and Start No.), Store File (except for User Name, File Name, Password, and Target Folder to Store), Preview, Text, Subject, Security, Recept. Notice

This section explains how to change the default functions of the initial copy screen.

1Specify scan settings and any other settings you require on the initial copy screen.

2Display the program screen.

  • When using the standard operation panel

    Press the [Program] key.

    Program key illustration

  • When using the Smart Operation Panel

    Press [Recall/Program/Change Program] on the bottom left of the screen.

3Press [Program as Defaults].

4Press [Program].

5Press [Yes].

Note

  • To restore the factory default settings on the initial screen, press [Restore Factory Defaults] in Step 4, and then press [Yes].

  • The default settings can be programmed separately for the normal and simple screens.