Guide to Names and Functions of Components

Front and left view

1. ADF

   Lower the ADF over originals placed on the exposure glass.

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

   The ADF scans both sides of an original one side at a time.

2. Exposure glass

   Place originals face down here.

3. Main power switch

   To operate the machine, the main power switch must be on. If it is off, turn the switch on.

4. Vents

   Prevent overheating.

5. Control panel

   See Guide to the Names and Functions of the Machine's Control Panel (When Using the Standard Operation Panel) or Guide to the Names and Functions of the Machine's Control Panel (When Using the Smart Operation Panel).

6. Finisher (Type 2 only)

   Sorts, stacks, and staples multiple sheets of paper.

7. Internal tray 1 (Type 1 only)/Finisher shift tray (Type 2 only)

   Copied/printed paper and fax messages are delivered here.

8. Front cover

   Open to access the inside of the machine.

9. Tray 1

   Load paper here.

10. Lower paper tray

    Load paper here.

11. Lower paper trays

    Load paper here.

Front and right view

1. ADF's extender

   Pull this extender to support large paper.

2. Right tray

   Printed paper is delivered here.

3. Upper right cover

   Open this cover when a paper jam occurs.

4. Duplex unit

   Open this cover when a paper jam occurs.

5. Tray 2 right cover

   Open this cover when a paper jam occurs.

6. Lower right cover

   Open this cover when a paper jam occurs.

7. Paper guides

   When loading paper in the bypass tray, align the paper guides flush against the paper.

8. Bypass tray

   Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the paper trays.

9. Extender

   Pull this extender out when loading A4, 8¹/₂ × 11 or larger size paper in the bypass tray.

Rear and left view

1. Vents

   Prevent overheating.