Skip header
 

Changing the Transmission Time of a Standby File

You can change the transmission time specified with Send Later.

You can also delete the transmission time. If the transmission time is deleted, the file is transmitted immediately.

1Press [TX/RX Status / Print].

Operation panel screen illustration

2Press [Check / Stop Transmission File].

3Select the file for which you want to change or cancel the transmission time.

4Press [Check / Change Settings].

5Press [Change TX Time].

If you press [Transmit Now], the file is transmitted immediately. However, if there is a file on standby, that file is sent first.

6Press [Change], re-enter the transmission time, and then press [Sharp].

Region A icon(mainly Europe)

Enter the transmission time using the number keys.

Region B icon(mainly North America)

Enter the transmission time using the number keys, and then select [AM] or [PM].

7Press [OK].

8Press [Exit].

Repeat from Step 3, if you want to change another transmission time.

9Press [Exit] twice.