Skip header
 

Manual Reception

When a telephone call comes in, the machine rings. If the call is a fax document, you must switch manually to facsimile mode.

1When the machine rings, pick up the handset of the external telephone.

2If you hear beeps, press the [Start] key. (The [Start] key is only available in facsimile mode when an original is not placed.)

3Press [Start RX].

4Replace the handset of the external telephone. The machine will start receiving.

Note

  • The machine does not operate in sleep mode even if you lift the handset of the external telephone. To operate the machine, you must exit sleep mode.