Skip header
 

Using the Address Book to Specify Destinations

When destinations are programmed in the Address Book, you can specify a destination by selecting a destination key from the destination list.

The programmed name appears on destination key.

You need to pre-register a destination in the Address Book.

For details about registering fax destinations or IP-Fax destinations, see Connecting the Machine/ System Settings.

For details about registering Internet Fax destinations or e-mail destinations, see Connecting the Machine/ System Settings.

For details about registering folder destinations, see Connecting the Machine/ System Settings.

When registering an e-mail destination, select [Email / Internet Fax Destination] for [Use Email Address for].

1Press the transmission type tab to switch the transmission type to fax/IP-Fax, Internet Fax, e-mail, or folder.

Operation panel screen illustration

2Press the title word key where the desired destination is programmed.

For example, if you want to specify "New York Office" programmed in "LMN", press [LMN].

3Press the destination key programmed with the desired destination.

If the desired destination key is not shown, press [Up arrow key] and [Down arrow key] to look through the list.

To cancel the selection, press the selected destination key again. You can also press the [Clear] key to cancel the selection.

To select more destinations, repeat Steps 2 and 3.

Note

  • The Facsimile Features menu includes a User Parameter (switch 17, bit 2) that enables you to configure the machine to force the user to press [Add] whenever s/he specifies a destination using a destination key. This prevents users accidentally sending documents to the wrong destination. See Parameter Settings.

  • To check the contents of destination keys, print the destination list using Print Address Book: Destination List under System Settings. For details about the printing method, see "Administrator Tools", Connecting the Machine/ System Settings.