Skip header
 

Preset Stamp

Messages registered in advance, such as "COPY", are stamped on copies.

Illustration of Preset Stamp

Important

  • You cannot use the bypass tray with this function.

  • Only one message can be stamped at a time.

The following eight messages are available for Preset Stamp:

"COPY", "URGENT", "PRIORITY", "For Your Info.", "PRELIMINARY", "For Internal Use Only", "CONFIDENTIAL", "DRAFT"

1Press [Edit / Color].

Operation panel screen illustration

2Press [Stamp].

3Press [Preset Stamp].

4Select the desired message.

Operation panel screen illustration

5Press [Change].

6Select the stamp position, size, and density, and then press [OK].

Operation panel screen illustration

7Press [All Pages] or [1st Page Only] to select the print page.

8Press [Stamp Color].

9Select the stamp color, and then press [OK].

10Press [OK] twice.

Note

  • Depending on paper size, if you change the stamp size, parts of the stamp might not be printed.

  • You can change the size and pattern of stamps. Depending on the setting, stamp density may change.

  • For details about stamp positions, see Stamps.

  • You can change the settings for Preset Stamp under [Preset Stamp] in User Tools. For details, see Preset Stamp.