Skip header
 

Copying onto Custom Size Paper from the Bypass Tray

Paper that has a horizontal length of 127.0–355.6 mm (5.00–14.00 inches) and a vertical length of 70.0–216.0 mm (2.76–8.50 inches) can be fed in from the bypass tray. Note however that the limitation on the horizontal and vertical length range will vary depending on which options are installed.

1Load the paper face down in the bypass tray.

The bypass tray (Operation panel screen illustration) is automatically selected.

2Press the [Sharp] key.

3Press [Paper Size].

4Press [Custom Size].

5Enter the horizontal size with the number keys, and then press [Sharp].

Operation panel screen illustration

6Enter the vertical size with the number keys, and then press [Sharp].

7Press [OK] twice.

8Place the originals, and then press the [Start] key.

Note