Skip header
 

Print Area

The following shows the recommended print area for this machine.

Illustration of print area for paper numbered callout illustration

  1. Print area

  2. Feed direction

  3. Approx. 4.2 mm (0.17 inches)

  4. Approx. 4.2 mm (0.17 inches)

  5. Approx. 4.2 mm (0.17 inches)

  6. Approx. 4.2 mm (0.17 inches)

Note

  • The print area may vary depending on the paper size, printer language and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.

  • If [Edge to Edge Print] under [System] in [Printer Features] is enabled, the margins on the left, right, and bottom edges in relation to the feed direction will become 0 mm. However, toner smearing may occur on the back side or near the edges of the printed paper.

  • The maximum width of a printable area perpendicular to the feed direction is 305 mm. If the optional Imageable Area Extension Unit is attached, the maximum width of a printable area can be extended to 316 mm. Printing starts from the upper left corner of the paper in relation to the feed direction. Accordingly, the right and bottom edges of an image will be cropped if the width of the image exceeds the maximum width of a printable area.

PreviousNext