Previous
Start a Web browser.
Enter "http://(machine's IP address or host name) /" in the address bar to access the printer whose settings you want to change.
Top Page of Web Image Monitor appears.
Click [Login].
The dialog box for entering the user name and password appears.
Enter the user name and password, and then click [Login].
Contact your administrator for information about the settings.
Depending on the configuration of your Web browser, the login user name and password might be saved. If you do not want to save them, configure your Web browser's settings so that this information is not saved.
In the menu area, click [Configuration] on the [Device Management] menu.
Under "Network", click [IPv4].
Check that [Active] is selected for [WINS] in the [Ethernet + Wireless LAN] column, and then enter the WINS server IPv4 address in [Primary WINS Server] and [Secondary WINS Server].
Click [OK].
“Updating...” appears. Wait for about one or two minutes, and then click [OK].
Quit Web Image Monitor.
You can also use telnet to configure WINS.
Use the "wins" command to make the setting with telnet.
For details about Web Image Monitor, see Using Web Image Monitor.
For details about telnet, see Remote Maintenance Using telnet.
