Previous
This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.
UNIX: Use the "stat" parameter and the "rsh", "rcp", "ftp", and "sftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.
telnet: Use the "status" command.
Messages |
Description |
|---|---|
Adjusting... |
The machine is initializing or calibrating. |
Call Service Center |
There is a malfunction in the machine. |
Canceling Job... |
The job is being reset. |
Configuring... |
Setting is being changed. |
Cover Open: Finisher Front |
The finisher cover is open. |
Cover Open: Front Cover |
The front cover is open. |
Cover Open: Lower Right |
The lower right cover is open. |
Cover Open: Upper Right Cover |
The upper right cover is open. |
Cover Open: Transfer Unit |
The transfer unit cover is open. |
Current Job Suspended |
The current job is suspended. |
Empty: Black Toner |
The black toner cartridge is almost empty. |
Empty: Black Toner Cartridge |
The black toner cartridge is empty. |
Empty: Cyan Toner |
The cyan toner cartridge is almost empty. |
Empty: Cyan Toner Cartridge |
The cyan toner cartridge is empty. |
Empty: Magenta Toner |
The magenta toner cartridge is almost empty. |
Empty: Magenta Toner Cartridge |
The magenta toner cartridge is empty. |
Empty: Yellow Toner |
The yellow toner cartridge is almost empty. |
Empty: Yellow Toner Cartridge |
The yellow toner cartridge is empty. |
Energy Saver Mode |
The machine is in Energy Saver Mode. |
Error: Ethernet Board |
An Ethernet board error has occurred. |
Error: HDD Board |
A hard disk drive board error has occurred. |
Error: Optional Font |
An error has occurred in the font file of the machine. |
Error: Parallel I/F Board |
An error has occurred in the parallel interface. |
Error: PDL |
An error has occurred in the page description language. |
Error: Rem. Certificate Renewal |
An error has occurred in the remote server renewal. |
Error: USB Interface |
An error has occurred in the USB interface. |
Error: Wireless Card |
There is a problem with IEEE802.11a/b/g/n interface unit or Bluetooth interface unit, or they are not supported. |
Full: Finisher Shift Tray |
Shift tray of Finisher is full. |
Full: Hole Punch Receptacle |
Punch Chip receptacle for hole punch is full. |
Full: Internal Tray 1 |
The internal tray 1 is full. |
Full: Waste Toner |
The waste toner is full. |
Hex Dump Mode |
It is a hex dump mode. |
In Use: Finisher |
Other function is using Finisher. |
In Use: Input Tray |
Other function is using the input tray. |
In Use: Staple Unit |
Other function is using the staple unit. |
Independent-supplier Toner |
Toner that is not recommended is set. |
Jobs Suspended |
All jobs are suspended. |
Key Card not inserted |
The machine is waiting for key card to be inserted. |
Key Card/Counter not inserted |
The machine is waiting for key card or key counter to be inserted. |
Key Counter not inserted |
The machine is waiting for key counter to be left in it. |
Loading Toner... |
Toner is being supplied. |
Low: Black Toner |
The black toner cartridge is not set correctly, or toner is almost running out. |
Low: Cyan Toner |
The cyan toner cartridge is not set correctly, or toner is almost running out. |
Low: Magenta Toner |
The magenta toner cartridge is not set correctly, or toner is almost running out. |
Low: Yellow Toner |
The yellow toner cartridge is not set correctly, or toner is almost running out. |
Malfunction: Finisher |
There is a problem with the finisher. |
Malfunction: Output Tray |
There is a problem with the output tray. |
Malfunction: Staple Unit |
There is a problem with the staple unit. |
Malfunction: Tray 1 |
There is a problem with tray 1. |
Malfunction: Tray 2 |
There is a problem with tray 2. |
Malfunction: Tray 3 |
There is a problem with tray 3. |
Malfunction: Tray 4 |
There is a problem with tray 4. |
Mismatch: Paper Size |
Indicated paper tray does not contain paper of selected size. |
Mismatch: Paper Size and Type |
Indicated paper tray does not contain paper of selected size and type. |
Mismatch: Paper Type |
Indicated paper tray does not contain paper of selected type. |
Near Replacing: Fsng. Belt Unit |
It is time to replace the fusing belt unit. |
Nearly Full: Waste Toner |
Waste toner bottle is nearly full. |
Need more Staples |
Stapler has almost run out of staples. |
No Paper: Selected Tray |
There is no paper in specified tray. |
Not Detected: Black Toner |
Black toner is not correctly set. |
Not Detected: Cyan Toner |
Cyan toner is not correctly set. |
Not Detected: Fusing Unit |
The fusing unit is not correctly set. |
Not Detected: Input Tray |
The paper feed tray is not correctly set. |
Not Detected: Magenta Toner |
Magenta toner is not correctly set. |
Not Detected: PCU (C) |
The photoconductor unit (cyan) is not correctly set. |
Not Detected: PCU (K) |
The photoconductor unit (black) is not correctly set. |
Not Detected: PCU (M) |
The photoconductor unit (magenta) is not correctly set. |
Not Detected: PCU (Y) |
The photoconductor unit (yellow) is not correctly set. |
Not Detected: Waste Toner Bottle |
Waste toner bottle is not correctly set. |
Not Detected: Yellow Toner |
Yellow toner is not correctly set. |
Not Detected:Int. Transfer Unit |
The transfer unit is not correctly set. |
Not Dtctd.:Bypass Tr. Ppr. Gds. |
The bypass tray paper guides are not correctly set. |
Offline |
Machine is offline. |
Paper in Duplex Unit |
The paper remains in the duplex unit. |
Paper in Finisher |
The paper remains in Finisher. |
Paper Misfeed: ADF |
The paper has jammed in ADF. |
Paper Misfeed: Duplex Unit |
The paper has jammed in Duplex Unit. |
Paper Misfeed: Finisher |
The paper has jammed in Finisher. |
Paper Misfeed: Input Tray |
The paper has jammed in the input tray. |
Printing... |
Printing is in progress. |
Proxy User/Password Incorrect |
The proxy user name and/or password setting is incorrect. |
RC Gate Connection Error |
RC Gate communication error has occurred. |
Ready |
The machine is ready to print. |
Renewing Remote Certificate |
The remote certificate is being renewed. |
Replace Fusing Belt Unit |
It is time to replace the fusing belt unit. |
Reset IPDS fonts |
An IPDS font error has occurred. |
SD Card Authentication failed |
SD card authentication failed. |
Supplies Order Call failed |
The supply order call has failed. |
Tray Error: Chaptering |
The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing. |
Tray Error: Duplex Printing |
Selected paper tray cannot be used for duplex printing. |
Warming Up... |
The machine is warming up. |
Check the error contents that may be printed in the configuration page.
