Skip header
 

Programming the Realm

1Display the initial settings screen.

  • When using the standard operation panel

    Press the [User Tools/Counter] key.

  • When using the Smart Operation Panel

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [User Tools] icon (Operation panel screen illustration) on the Home screen 4.

2Press [System Settings].

3Press [Administrator Tools].

4Press [Down arrow keyNext] three times.

5Press [Program / Change / Delete Realm].

6Check that [Program / Change] is selected.

7Press [*Not Programmed].

8Press [Change] under "Realm Name".

9Enter a realm name, and then press [OK].

Enter the realm name or host name.

You can enter a realm name using up to 64 characters.

10Press [Change] under "KDC Server Name".

11Enter a KDC server name, and then press [OK].

Enter the KDC server name, host name or IPv4 address.

You can enter a KDC server name using up to 64 characters.

12Press [Change] under "Domain Name".

13Enter the domain name, and then press [OK].

Enter the domain name or host name.

You can enter a domain name using up to 64 characters.

14Press [OK].

15Press [Exit].

16Close the initial settings screen.

  • When using the standard operation panel

    Press the [User Tools/Counter] key.

  • When using the Smart Operation Panel

    Press [User Tools/Counter] (Operation panel screen illustration) on the top right of the screen.