Skip header
 

Screen Device Settings

This section describes the user tools in [Screen Device Settings] under [Screen Features].

Screen Startup Mode

Select the start up mode of the Smart Operation Panel.

  • Normal

    When you turn on the power, the [Home] screen appears after the start up screen is displayed. Normal mode uses less energy than Quick mode.

  • Quick

    The [Home] screen appears as soon as you turn on the power.

Default: [Normal]

Screen SD Card Slot

Specify whether or not enable the SD card slot when you use the functions of the Smart Operation Panel.

Default: [Active]

Import Screen Setting Information

You can import the setting information for Screen Features from the SD card.

To use this function, administrator authentication must be enabled.

Export Screen Setting Information

You can export the setting information for Screen Features to the SD card.

To use this function, administrator authentication must be enabled.

Import History

You can check the import history of the setting information of the Screen Features. It shows a history of the 100 most recent imports.

Server Settings

  • Server Function

    Specify whether or not enable the server function.

    Default: [Active]

  • Install Server Certificate

    You can install a server certificate for SSL communication.

Initialize Screen Features Settings

You can initialize the Screen Features settings, and the home screen settings and browser settings of the Smart Operation Panel.

Function Priority

Specify the mode to be displayed automatically after the operation switch is turned on or when System Reset mode is turned on. You can select one of the following modes:

  • Home

  • Web Browser

  • Quick Copy

  • Quick Fax

  • Scan to Me

  • Quick Scanner

  • Address Book Management

  • Copier

  • Document Server

  • Fax

  • Printer

  • Scanner

  • Browser

  • Embedded software applications

Default: [Home]

Note

  • Contact your sales or service representative to use this function.