Skip header
 

Specifications for the Main Unit

Configuration:

Desktop

Hard disk

250 GB or more

Photosensitivity type:

OPC drum

Original scanning:

One-dimensional solid scanning system through CCD

Copy process:

Laser beam scanning and electro-photographic printing

Development:

Dry two-component magnetic brush development system

Fusing:

Direct Heating (DH) fusing

Resolution:

  • Scanning originals: 600 dpi

  • Copying: 600 dpi

Exposure glass:

Stationary original exposure type

Original reference position:

Rear left corner

Warm-up time (23 °C (73.4 °F), rated voltage)

  • Region A icon (mainly Europe)

    • When using a model with the standard operation panel

      • Type 1: 19 seconds

      • Type 2: 19 seconds

    • When using a model with the Smart Operation Panel

      • Type 1: 69 seconds

      • Type 2: 69 seconds

  • Region A icon (mainly Asia)

    • Type 1: 19 seconds

    • Type 2: 19 seconds

  • Region B icon (mainly North America)

    • Type 1: 19 seconds

    • Type 2: 19 seconds

Originals:

Sheet, book, three-dimensional object

Maximum original size:

  • Region A icon(mainly Europe and Asia)

    A3Landscape

  • Region B icon(mainly North America)

    11 × 17Landscape

Paper size:

  • Tray 1:

    A4Portrait, 81/2 × 11Portrait, A5Portrait, B5 JISPortrait

    The paper tray fence is fixed. If you wish to change the size of paper placed in this tray, contact your service representative.

  • Tray 2:

    A3Landscape, A4PortraitLandscape, A5PortraitLandscape, A6Landscape, B4 JISLandscape, B5 JISPortraitLandscape, B6 JISLandscape,

    11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 13Landscape, 81/2 × 11PortraitLandscape, 81/4 × 14Landscape, 81/4 × 13Landscape, 8 × 13Landscape, 8 × 10Landscape, 71/4 × 101/2PortraitLandscape, 51/2 × 81/2Landscape, 41/8 × 91/2PortraitLandscape, 37/8 × 71/2Landscape, C5 EnvPortraitLandscape, C6 EnvPortraitLandscape, DL EnvPortraitLandscape,

    8KLandscape, 16KPortraitLandscape, 12 × 18Landscape, 11 × 15Landscape, 10 × 14Landscape, SRA3Landscape

  • Tray 2 (custom size):

    Vertical: 90.0–320.0 mm (3.55–12.59 inches)

    Horizontal: 148.0–457.2 mm (5.83–18.00 inches)

    When loading paper with a vertical width of more than 304.8 mm (12.0 inches) into Tray 2, use paper that has a horizontal length of 450 mm (17.8 inches) or less.

  • Bypass tray:

    A3Landscape, A4PortraitLandscape, A5PortraitLandscape, A6Landscape, B4 JISLandscape, B5 JISPortraitLandscape, B6 JISLandscape,

    11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 13Landscape, 81/2 × 11PortraitLandscape, 81/4 × 14Landscape, 81/4 × 13Landscape, 8 × 13Landscape, 8 × 10Landscape, 71/4 × 101/2PortraitLandscape, 51/2 × 81/2Landscape,

    41/8 × 91/2PortraitLandscape, 37/8 × 71/2PortraitLandscape, C5 EnvPortraitLandscape, C6 EnvPortraitLandscape, DL EnvPortraitLandscape, 8KLandscape, 16KPortraitLandscape, 12 × 18Landscape, 11 × 15Landscape, 10 × 14Landscape, SRA3Landscape, SRA4PortraitLandscape

  • Bypass tray (custom size):

    Vertical: 90.0–320.0 mm (3.55–12.59 inches)

    Horizontal: 148.0–457.2 mm (5.83–18.00 inches)

    In printer or facsimile mode, the maximum horizontal length of the custom size is 600.0 mm (23.62 inches).

  • Duplex:

    A3Landscape, A4PortraitLandscape, A5PortraitLandscape, A6Landscape, B4 JISLandscape, B5 JISPortraitLandscape, B6 JISLandscape,

    11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 13Landscape, 81/2 × 11PortraitLandscape, 81/4 × 14Landscape, 81/4 × 13Landscape, 8 × 13Landscape, 8 × 10Landscape, 71/4 × 101/2PortraitLandscape, 51/2 × 81/2Landscape

    8KLandscape, 16KPortraitLandscape, 12 × 18Landscape, 11 × 15Landscape, 10 × 14Landscape, SRA3Landscape, SRA4PortraitLandscape

  • Duplex (custom size):

    Vertical: 90.0–320.0 mm (3.55–12.59 inches)

    Horizontal: 148.0–457.2 mm (5.83–18.00 inches)

Paper weight:

  • Paper trays: 60–300 g/m2 (16 lb. Bond–110 lb. Cover)

  • Bypass: 52–300 g/m2 (14 lb. Bond–110 lb. Cover)

  • Duplex: 52–169 g/m2 (14 lb. Bond–90 lb. Index)

For details about and recommendations concerning thick paper, see "Thick Paper", Paper Specifications and Adding Paper.

Missing image area (Copier):

  • Leading edge: 4.2 ± 1.5 mm (0.17 ± 0.06 inches)

  • Trailing edge: 0.5–6.0 mm (0.02–0.24 inches) (3.0–6.0 mm (0.12–0.24 inches) in Duplex mode)

  • Left and right edges: 0.5–4.0 mm (0.02–0.16 inches)

First copy/print time:

  • Type 1

    • Full color: 7.7 seconds *1

    • B&W: 5.5 seconds *1

  • Type 2

    • Full color: 7.7 seconds *1

    • B&W: 5.5 seconds *1

(A4Portrait, 81/2 × 11Portrait, delivered face down, feeding from tray 1, on the exposure glass)

*1 The first copy/print time may differ depending on the conditions and environment of the machine.

Copy/print speed (Full Color / B&W):

  • Type 1: 20 sheets/minute (A4Portrait, 81/2 × 11Portrait)

  • Type 2: 25 sheets/minute (A4Portrait, 81/2 × 11Portrait)

Reproduction ratio:

  • Region A icon(mainly Europe and Asia)

    Preset reproduction ratios (%):

    • Enlargement: 400, 200, 141, 122, 115

    • Full size: 100

    • Reduction: 93, 82, 75, 71, 65, 50, 25

  • Region B icon(mainly North America)

    Preset reproduction ratios (%):

    • Enlargement: 400, 200, 155, 129, 121

    • Full size: 100

    • Reduction: 93, 85, 78, 73, 65, 50, 25

  • Zoom: From 25–400% in increments of 1%

Maximum continuous copy run:

999 sheets

Paper capacity (80 g/m2, 20 lb. Bond):

  • Tray 1, 2: 550 sheets

  • Bypass tray: 100 sheets

Power requirements:

  • Region A icon(mainly Europe and Asia)

    220–240 V, 8 A, 50/60 Hz

  • Region B icon(mainly North America)

    120–127 V, 12 A, 60 Hz

Power consumption

  • Region A icon(mainly Europe and Asia)

    • Main unit only


      Type 1

      Type 2

      Ready

      57 W

      57 W

      During printing

      440 W

      440 W

      Maximum

      1,700 W

      1,700 W

      The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

    • Complete system


      Type 1

      Type 2

      Maximum

      1,700 W

      1,700 W

      The complete system consists of the main unit, ADF, lower paper trays, internal tray 2, Internal Finisher SR3130, fax unit, two extra G3 interface unit, and wireless LAN board.

  • Region B icon(mainly North America)

    • Main unit only


      Type 1

      Type 2

      Ready

      74 W

      74 W

      During printing

      440 W

      440 W

      Maximum

      1,580 W

      1,580 W

      The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

    • Complete system


      Type 1

      Type 2

      Maximum

      1,580 W

      1,580 W

      The complete system consists of the main unit, ADF, lower paper trays, internal tray 2, Internal Finisher SR3130, fax unit, two extra G3 interface unit, and wireless LAN board.

Dimensions:

  • W × D × H up to ADF Region A icon(mainly Europe):

    587 × 685 × 913 mm (23.2 × 27.0 × 36.0 inches)

  • W × D × H up to exposure glass Region A icon(mainly Asia):

    587 × 685 × 788 mm (23.2 × 27.0 × 31.1 inches)

  • W × D × H up to ADF Region B icon(mainly North America):

    587 × 685 × 913 mm (23.2 × 27.0 × 36.0 inches)

Space for main unit (W × D):

1,149 × 1,236 mm (45.3 × 48.7 inches) (including the bypass tray and output trays)

Noise emission

  • Sound power level:

    • Main unit only


      Type 1

      Type 2

      Stand-by

      32.4 dB (A)

      32.5 dB (A)

      Copying

      B&W: 59.5 dB (A)

      Color: 60.7 dB (A)

      B&W: 60.2 dB (A)

      Color: 61.6 dB (A)

    • Complete system


      Type 1

      Type 2

      Stand-by

      33.0 dB (A)

      32.5 dB (A)

      Copying

      67.8 dB (A)

      67.8 dB (A)

  • Sound pressure level:

    • Main unit only


      Type 1

      Type 2

      Stand-by

      19.5 dB (A)

      19.4 dB (A)

      Copying

      B&W: 46.1 dB (A)

      Color: 46.7 dB (A)

      B&W: 46.8 dB (A)

      Color: 47.6 dB (A)

    • Complete system


      Type 1

      Type 2

      Stand-by

      19.7 dB (A)

      19.5 dB (A)

      Copying

      54.8 dB (A)

      55.0 dB (A)

      • Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.

      • Sound pressure level is measured from the position of the bystander.

      • The complete system of consists of the main unit, ADF, lower paper trays, internal tray 2, Internal Finisher SR3130, and punch unit.

Weight:

  • Region A icon(mainly Europe)

    Approx. 90 kg (198.5 lb.)

  • Region A icon(mainly Asia)

    Approx. 81 kg (178.6 lb.)

  • Region B icon(mainly North America)

    Approx. 90 kg (198.5 lb.)