Skip header
 

Re-entering a fax number to confirm destination

Enter the fax number again to confirm the destination is correct.

Transmission is disabled if the confirmation fax number does not match the first fax number. This function helps prevent users accidentally sending faxes to the wrong destination.

If you want to enable this function, contact your service representative.

1Make sure that [Fax] is selected.

Operation panel screen illustration

2Press [Manual Entry].

3Enter the fax number using the number keys, and then press [OK].

4Enter the fax number again, and then press [OK].

If the “Entered destination is not correct.” message appears, press [Exit] and check the fax number again, and then repeat the procedure from Step 2.

Note

  • Please contact your service representative if specifying the number of times (1 to 15) that the fax number must be re-entered. Step 4 must be repeated as many times as is set here.

  • When the fax number reentry function is enabled, you cannot use On Hook Dial and Manual Dial.

  • If you want to use On Hook Dial and Manual Dial on your machine while the fax number reentry function is enabled, contact your service representative. Note that the fax number reentry function does not work when you use On Hook Dial or Manual Dial.