Skip header
 

This section describes the user tools in the Edit menu under [Copier / Document Server Features].

Enter the width of the binding margin with the number keys as follows:

Enter the width of the erased margin with the number keys as follows:

Front Margin: Left / Right

Specify left and right margins on the front side of copies in Margin Adjustment mode.

Default:

Region A icon(mainly Europe and Asia)

[Left: 5 mm]

Region B icon(mainly North America)

[Left: 0.2 inch]

Back Margin: Left / Right

Specify left and right margins on the back side of copies in Margin Adjustment mode.

Default:

Region A icon(mainly Europe and Asia)

[Right: 5 mm]

Region B icon(mainly North America)

[Right: 0.2 inch]

Front Margin: Top / Bottom

Specify top and bottom margins on the front side of copies in Margin Adjustment mode.

Default:

Region A icon(mainly Europe and Asia)

[Top: 0 mm]

Region B icon(mainly North America)

[Top: 0.0 inch]

Back Margin: Top / Bottom

Specify top and bottom margins on the back side of copies in Margin Adjustment mode.

Default:

Region A icon(mainly Europe and Asia)

[Top: 0 mm]

Region B icon(mainly North America)

[Top: 0.0 inch]

1 Sided 2 Sided Auto Margin: TtoT

In 1 Sided 2 Sided mode, you can specify the margins on the back side.

Default:

Region A icon(mainly Europe and Asia)

[Right: 5 mm]

Region B icon(mainly North America)

[Right: 0.2 inch]

1 Sided 2 Sided Auto Margin: TtoB

In 1 Sided 2 Sided mode, you can specify the margins on the back side.

Default:

Region A icon(mainly Europe and Asia)

[Top: 0 mm]

Region B icon(mainly North America)

[Top: 0.0 inch]

Erase Border Width

Specify the width for erasing border.

Default:

Region A icon(mainly Europe and Asia)

[10 mm]

Region B icon(mainly North America)

[0.4 inch]

Erase Original Shadow in Combine

In Combine mode, you can specify whether to erase a 3 mm, 0.1 inches boundary margin around all four edges of each original.

Default: [On]

Erase Center Width

Specify the width of the erased center margins with this function.

Default:

Region A icon(mainly Europe and Asia)

[10 mm]

Region B icon(mainly North America)

[0.4 inch]

Front Cover Copy in Combine

You can make a combined copy on the front cover sheet when you select Front Cover mode.

  • Combine

    Illustration of Front Cover Copy in Combine

  • Do not Combine

    Illustration of Front Cover Copy in Combine

Default: [Combine]

Copy Order in Combine

You can select the copy order in Combine mode from [From Left to Right] or [From Top to Bottom].

  • From Left to Right

    Illustration of Copy Order in Combine

  • From Top to Bottom

    Illustration of Copy Order in Combine

Default: [From Left to Right]

Orientation: Booklet, Magazine

Select the opening orientation of copies made using Booklet or Magazine mode.

Default: [Open to Left]

Copy on Designating Page in Combine

Specify whether to make a combined copy on the inserted slip sheets in Designate / Chapter mode.

Default: [Combine]

Image Repeat Separation Line

You can select a separation line using the Image Repeat function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].

Illustration of Image Repeat Separation Line

Default for [Type of Separation Line]: [None]

In full color, you can also select the color of the separation line.

Default for [Color of Separation Line in Full Color]: [Black]

Separation line color cannot be specified when selecting [None].

In black and white, printing will be done in black.

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.

Double Copies Separation Line

You can select a separation line using the Double Copies function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].

Illustration of Double Copies Separation Line

Default for [Type of Separation Line]: [None]

In full color, you can also select the color of the separation line.

Default for [Color of Separation Line in Full Color]: [Black]

Separation line color cannot be specified when selecting [None].

In black and white, printing will be done in black.

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.

Separation Line in Combine

You can select a separation line using the Combine function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].

Illustration of Separation Line in Combine

Default for [Type of Separation Line]: [None]

In full color, you can also select the color of the separation line.

Default for [Color of Separation Line in Full Color]: [Black]

Separation line color cannot be specified when selecting [None].

In black and white, printing will be done in black.

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.

Note

  • For details about how to change the Copier / Document Server Features, see "Changing Default Settings", Connecting the Machine/ System Settings.