Skip header
 

Print Area

The following shows the recommended print area for this machine.

Illustration of print area for paper

  1. Print area

  2. Feed direction

  3. 3 ± 2 mm (0.12 ± 0.08 inches)

  4. 0.5 mm (0.02 inches) or more

  5. 2 + 2.5/-1.5 mm (0.08 + 0.10/-0.06 inches)

  6. 2 ± 1.5 mm (0.08 ± 0.06 inches)

Note

  • The print area may vary depending on the paper size, printer language and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.

  • If [Edge to Edge Print] under [System] in [Printer Features] is enabled, the margins on the left, right, and bottom edges in relation to the feed direction will become 0 mm. However, toner smearing may occur on the back side or near the edges of the printed paper.

PreviousNext