Skip header
 

Loading Paper into Large Capacity Tray (LCT)

Region A icon(mainly Europe and Asia)

The LCT can hold A4Portrait paper only. If you want to print on 81/2 × 11Portrait from the LCT, contact your service representative.

Region B icon(mainly North America)

The LCT can hold 81/2 × 11Portrait paper only. If you want to print on A4Portrait from the LCT, contact your service representative.

Important

  • When paper loaded in the right side of the LCT runs out, paper on the left is automatically shifted to the right. Do not pull out the LCT while the tray is moving paper; wait until sounds stop coming from the tray.

  • For the right stack, align the right edge of the paper with the right edge of the tray. For the left stack, align the left edge of the paper to the left edge of the tray.

1Carefully pull out the LCT until it stops.

LCT illustration

2Square the paper and load it print side up.

Do not stack paper over the limit mark.

  • Whole tray pulled out

    LCT illustration

  • Left half of the tray pulled out

    LCT illustration

3Carefully push the LCT fully in.

Note

  • You can load paper even if the LCT is in use. It is okay to pull out the left half of the tray while the LCT is in use.

PreviousNext