Exposure glass cover
Lower this cover over originals.
ADF
Load a stack of originals here. They will feed in automatically.
Lower paper tray
Holds up to 550 sheets of paper.
Caster table for lower paper tray
To use the lower paper tray, attach the caster table.
Lower paper trays
Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.
LCT
Holds up to 2,000 sheets of paper.
You can load paper even if the LCT is in use. It is okay to pull out the left half of the tray while the LCT is in use.
Internal tray 2
If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
Bridge unit
Relays paper to the finisher.
Internal shift tray
Sorts and stacks multiple sheets of paper.
Internal finisher
Sorts, stacks, and staples multiple sheets of paper.
Copies can be punched if the optional punch unit is installed on the finisher.
1000-sheet finisher
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
Booklet finisher
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Finisher booklet tray
Copies can be punched if the optional punch unit is installed on the finisher.
You cannot install multiple finishers simultaneously.
The 1000-sheet finisher and booklet Finisher can be attached only if the bridge unit, the finisher adapter, and either lower paper trays or LCT are installed.