This section describes the user tools in the Stamp Text menu under [Stamp].
Font
You can select the font in Stamp Text mode.
Default: [Font 1]
Size
You can select the stamp text size.
Default: [Auto]
Superimpose
You can have the stamp text printed in white when it overlaps black parts of the image.
Default: [Off]
Stamp Setting
Specify how stamp text is printed.
Stamp Position
Specify where to print the Stamp Text. For details about the stamp position, see Stamps.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)
Stamp positions |
Default |
Possible range |
---|---|---|
Top Left |
32 mm from the left edge 8 mm from the top edge |
From 5 to 144 mm from the left edge From 5 to 144 mm from the top edge |
Top Center |
Center 8 mm from the top edge |
From 0 to 72 mm to the right or left of the center From 5 to 144 mm from the top edge |
Top Right |
12 mm from the right edge 8 mm from the top edge |
From 5 to 144 mm from the right edge From 5 to 144 mm from the top edge |
Bottom Left |
32 mm from the left edge 8 mm from the bottom edge |
From 5 to 144 mm from the left edge From 5 to 144 mm from the bottom edge |
Bottom Center |
Center 8 mm from the bottom edge |
From 0 to 72 mm to the right or left of the center From 5 to 144 mm from the bottom edge |
Bottom Right |
12 mm from the right edge 8 mm from the bottom edge |
From 5 to 144 mm from the right edge From 5 to 144 mm from the bottom edge |
(mainly North America)
Stamp positions |
Default |
Possible range |
---|---|---|
Top Left |
1.3 inches from the left edge 0.3 inches from the top edge |
From 0.2 to 5.7 inches from the left edge From 0.2 to 5.7 inches from the top edge |
Top Center |
Center 0.3 inches from the top edge |
From 0 to 2.8 inches to the right or left of the center From 0.2 to 5.7 inches from the top edge |
Top Right |
0.5 inches from the right edge 0.3 inches from the top edge |
From 0.2 to 5.7 inches from the right edge From 0.2 to 5.7 inches from the top edge |
Bottom Left |
1.3 inches from the left edge 0.3 inches from the bottom edge |
From 0.2 to 5.7 inches from the left edge From 0.2 to 5.7 inches from the bottom edge |
Bottom Center |
Center 0.3 inches from the bottom edge |
From 0 to 2.8 inches to the right or left of the center From 0.2 to 5.7 inches from the bottom edge |
Bottom Right |
0.5 inches from the right edge 0.3 inches from the bottom edge |
From 0.2 to 5.7 inches from the right edge From 0.2 to 5.7 inches from the bottom edge |
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
Change Job Serial No. for First Job
You can select whether or not to print the serial number after the stamped text. For details about how to specify the setting, see Printing text and serial numbers.
Default: [Off]
For details about how to change the Copier / Document Server Features, see "Changing Default Settings", Connecting the Machine/ System Settings.