Skip header
 

Tray T1 to T4 (when the two-tray Wide Large Capacity Tray is installed)

This section explains the paper tray settings for Tray T1 to T4 (when the two-tray wide LCT is installed).

Paper Type

  • Plain Paper

  • Recycled Paper

  • Color Paper 1

  • Color Paper 2

  • Yellow

  • Green

  • Blue

  • Purple

  • Ivory

  • Orange

  • Pink

  • Red

  • Gray

  • Letterhead

  • Label Paper

  • Translucent Paper

  • Preprinted Paper

  • Bond Paper

  • Cardstock

  • OHP (Transparency)

  • Envelope

  • Coated: Glossy

  • Coated: Matted

  • Prepunched Paper

  • Tab Stock

Default: [Plain Paper]

If you select [Tab Stock], you must configure the detailed settings.

Paper Weight

  • Paper Weight 0 (40.0–52.2g/m2)

  • Paper Weight 1 (52.3–63.0g/m2)

  • Paper Weight 2 (63.1–80.0g/m2)

  • Paper Weight 3 (80.1–105.0g/m2)

  • Paper Weight 4 (105.1–163.0g/m2)

  • Paper Weight 5 (163.1–220.0g/m2)

  • Paper Weight 6 (220.1–256.0g/m2)

  • Paper Weight 7 (256.1–300.0g/m2)

  • Paper Weight 8 (300.1–350.0g/m2)

Default: [Paper Weight 2 (63.1–80.0g/m2)]

Apply Duplex

  • Yes

  • No

Default: [Yes]

Duplex printing is automatically disabled if you select [Label Paper], [Translucent Paper], [OHP (Transparency)], [Envelope], or [Tab Stock] for [Paper Type].

Apply Auto Paper Select

  • Yes

  • No

Default: [Yes]

Paper Size

Auto Detect, A3Landscape, A4Portrait, A4Landscape, A5Portrait, A5Landscape, A6Landscape, B4 JISLandscape, B5 JISPortrait, B5 JISLandscape, B6 JISLandscape,

SRA3Landscape, SRA4Portrait, SRA4Landscape, 310 × 432mmLandscape, 226 × 310mmPortrait, 226 × 310mmLandscape,

13 × 191/5Landscape, 13 × 19Landscape, 13 × 18Landscape, 123/5 × 191/5Landscape, 123/5 × 181/2Landscape, 12 × 18Landscape,

11 × 17Landscape, 11 × 15Landscape, 11 × 14Landscape, 10 × 15Landscape, 10 × 14Landscape, 81/2 × 14Landscape, 81/2 × 13Landscape,

81/2 × 11Portrait, 81/2 × 11Landscape, 81/4 × 14Landscape, 81/4 × 13Landscape, 8 × 13Landscape, 8 × 10Landscape, 71/4 × 101/2Portrait,

71/4 × 101/2Landscape, 51/2 × 81/2Portrait, 51/2 × 81/2Landscape, 8KLandscape, 16KPortrait, 16KLandscape, Custom Size

Default: [Auto Detect]

You can specify a custom size between 100.0 and 330.2 mm (3.94 and 13.00 inches) vertically, and between 139.7 and 487.7 mm (5.50 and 19.20 inches) horizontally.

For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.

Note

  • If you want to use glossy paper, select [Coated: Glossy] for [Paper Type]. If you want to use matte paper (including silk, dull, and satin paper), select [Coated: Matted] for [Paper Type].

  • The lock mark (Operation panel screen illustration ) is displayed next to the paper tray if [Apply Auto Paper Select] is not enabled.