Top Page > About This Machine > Maintenance and Specifications > Specifications > Specifications for the Main Unit

Specifications for the Main Unit

Previous Next

Configuration:

Console

Hard disk:

320 GB × 2

Photosensitivity type:

OPC drum

Original scanning:

One-dimensional solid scanning system through CCD

Copy/print process:

Dry electrostatic transfer system

Development:

Dry two-component magnetic brush development system

Fusing:

Fusing belt type

Resolution^*1:

Scanning originals: 600 dpi
Copying: 1200 × 4800 dpi

Resolution^*2:

1200 × 4800 dpi

Exposure glass^*1:

Stationary original exposure type

Original reference position^*1:

Rear left corner

Warm-up time

360 seconds or less (23°C (73.4°F), rated voltage)

Originals^*1:

Sheet, book, three-dimensional object

Maximum original size (ADF, exposure glass)^*1:

(mainly Europe)
A3
(mainly North America)
11 × 17

Paper size:

Trays 1–3:
For details, see Recommended Paper Sizes and Types.
Duplex:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂, 8K, 16K,
12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 13 × 19¹/₅, 13 × 19, 12³/₅ × 19¹/₅, 12³/₅ × 18¹/₂, 13 × 18, SRA3, SRA4, 226 × 310 mm, 310 × 432 mm
Duplex (custom size):
Vertical: 105.0–330.2 mm (4.14–13.00 inches)
Horizontal: 139.7–487.7 mm (5.50–19.20 inches)

Paper weight:

Trays 1–3: For details, see Recommended Paper Sizes and Types.
Duplex: 52.3–256.0 g/m² (14.0 lb. Bond–141.0 lb. Index)

For details about and recommendations concerning thick paper, see Thick paper.

Missing image area (Copier)^*1:

Leading edge: 4.0 ± 0.5 mm (0.16 ± 0.02 inches)
Trailing edge: 4.0 ± 1.0 mm (0.16 ± 0.04 inches)
Left and right edges: 2.0 ± 1.5 mm (0.08 ± 0.06 inches)

First copy/print time:

Type 1: 6.3 seconds
Type 2: 5.6 seconds
Type 3: 4.6 seconds
(A4, 8¹/₂ × 11, delivered face down, feeding from tray 1, on the exposure glass)
Type 4: 5.6 seconds
Type 5: 4.6 seconds
(A4, 8¹/₂ × 11, feeding from tray 1)

Copy/print speed:

Type 1: 95 sheets/minute (A4, 8¹/₂ × 11)
Type 2: 110 sheets/minute (A4, 8¹/₂ × 11)
Type 3: 135 sheets/minute (A4, 8¹/₂ × 11)
Type 4: 110 sheets/minute (A4, 8¹/₂ × 11)
Type 5: 135 sheets/minute (A4, 8¹/₂ × 11)

Reproduction ratio^*1:

(mainly Europe)
Preset reproduction ratios (%):
- Enlargement: 400, 200, 141, 122, 115
- Full size: 100
- Reduction: 93, 82, 75, 71, 65, 50, 25
(mainly North America)
Preset reproduction ratios (%):
- Enlargement: 400, 200, 155, 129, 121
- Full size: 100
- Reduction: 93, 85, 78, 73, 65, 50, 25

Zoom:

From 25–400% in increments of 1%

Maximum continuous copy/print run:

9,999 sheets

Paper capacity (80 g/m², 20 lb. Bond):

Tray 1 (Tandem tray): 2,000 sheets (1,000 sheets × 2)
Trays 2 and 3: 500 sheets

Power requirements:

(mainly Europe)
220–240 V, 16 A, 50/60 Hz
(mainly North America)
208–240 V, 20 A, 50/60 Hz

Power consumption

(mainly Europe)
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Ready
  
  420 W
  
  420 W
  
  420 W
  
  420 W
  
  420 W
  
  During printing
  
  1,800 W
  
  2,000 W
  
  2,250 W
  
  1,900 W
  
  2,200 W
  
  Maximum
  
  1,900 W
  
  2,100 W
  
  2,350 W
  
  2,050 W
  
  2,300 W
  
  The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Maximum
  
  2,840 W
  
  3,010 W
  
  3,350 W
  
  2,810 W
  
  3,150 W
  
  The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray 7), interposer, and Booklet Finisher SR5060.
(mainly North America)
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Ready
  
  420 W
  
  420 W
  
  420 W
  
  420 W
  
  420 W
  
  During printing
  
  1,800 W
  
  2,000 W
  
  2,250 W
  
  1,900 W
  
  2,200 W
  
  Maximum
  
  1,900 W
  
  2,100 W
  
  2,350 W
  
  2,050 W
  
  2,300 W
  
  The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Maximum
  
  2,800 W
  
  3,020 W
  
  3,270 W
  
  2,820 W
  
  3,070 W
  
  The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray 7), interposer, and Booklet Finisher SR5060.

	Type 1	Type 2	Type 3	Type 4	Type 5
Ready	420 W	420 W	420 W	420 W	420 W
During printing	1,800 W	2,000 W	2,250 W	1,900 W	2,200 W
Maximum	1,900 W	2,100 W	2,350 W	2,050 W	2,300 W

	Type 1	Type 2	Type 3	Type 4	Type 5
Maximum	2,840 W	3,010 W	3,350 W	2,810 W	3,150 W

	Type 1	Type 2	Type 3	Type 4	Type 5
Ready	420 W	420 W	420 W	420 W	420 W
During printing	1,800 W	2,000 W	2,250 W	1,900 W	2,200 W
Maximum	1,900 W	2,100 W	2,350 W	2,050 W	2,300 W

	Type 1	Type 2	Type 3	Type 4	Type 5
Maximum	2,800 W	3,020 W	3,270 W	2,820 W	3,070 W

Dimensions:

Types 1, 2, 3 (W × D × H up to ADF (excluding the control panel and the attention light))
1,141 × 900 × 1,197 mm (45.0 × 35.5 × 47.2 inches)
Types 4, 5 (W × D × H up to the top board (excluding the control panel and the attention light))
1,141 × 900 × 1,010 mm (45.0 × 35.5 × 39.8 inches)

Space for main unit (W × D):

1,141 × 900 mm (45.0 × 35.5 inches)

Noise emission (mainly North America)

Sound power level:
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Stand-by
  
  61.5 dB (A)
  
  66.0 dB (A)
  
  73.5 dB (A)
  
  66.0 dB (A)
  
  73.5 dB (A)
  
  Copying/Printing
  
  74.5 dB (A)
  
  76.0 dB (A)
  
  78.5 dB (A)
  
  76.0 dB (A)
  
  78.5 dB (A)
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Stand-by
  
  70.0 dB (A)
  
  70.0 dB (A)
  
  77.5 dB (A)
  
  70.0 dB (A)
  
  77.5 dB (A)
  
  Copying/Printing
  
  80.0 dB (A)
  
  80.0 dB (A)
  
  82.5 dB (A)
  
  80.0 dB (A)
  
  82.5 dB (A)

	Type 1	Type 2	Type 3	Type 4	Type 5
Stand-by	61.5 dB (A)	66.0 dB (A)	73.5 dB (A)	66.0 dB (A)	73.5 dB (A)
Copying/Printing	74.5 dB (A)	76.0 dB (A)	78.5 dB (A)	76.0 dB (A)	78.5 dB (A)

	Type 1	Type 2	Type 3	Type 4	Type 5
Stand-by	70.0 dB (A)	70.0 dB (A)	77.5 dB (A)	70.0 dB (A)	77.5 dB (A)
Copying/Printing	80.0 dB (A)	80.0 dB (A)	82.5 dB (A)	80.0 dB (A)	82.5 dB (A)

Sound pressure level:
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Stand-by
  
  55.5 dB (A)
  
  60.0 dB (A)
  
  67.5 dB (A)
  
  60.0 dB (A)
  
  67.5 dB (A)
  
  Copying/Printing
  
  68.5 dB (A)
  
  70.0 dB (A)
  
  72.5 dB (A)
  
  70.0 dB (A)
  
  72.5 dB (A)
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Type 5
  
  Stand-by
  
  64.0 dB (A)
  
  64.0 dB (A)
  
  71.5 dB (A)
  
  64.0 dB (A)
  
  71.5 dB (A)
  
  Copying/Printing
  
  74.0 dB (A)
  
  74.0 dB (A)
  
  76.5 dB (A)
  
  74.0 dB (A)
  
  76.5 dB (A)
  - Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
  - Sound pressure level is measured from the position of the bystander.
  - The complete system consists of the main unit, three-tray wide LCT, the high capacity stacker, and Booklet Finisher SR5060.

	Type 1	Type 2	Type 3	Type 4	Type 5
Stand-by	55.5 dB (A)	60.0 dB (A)	67.5 dB (A)	60.0 dB (A)	67.5 dB (A)
Copying/Printing	68.5 dB (A)	70.0 dB (A)	72.5 dB (A)	70.0 dB (A)	72.5 dB (A)

	Type 1	Type 2	Type 3	Type 4	Type 5
Stand-by	64.0 dB (A)	64.0 dB (A)	71.5 dB (A)	64.0 dB (A)	71.5 dB (A)
Copying/Printing	74.0 dB (A)	74.0 dB (A)	76.5 dB (A)	74.0 dB (A)	76.5 dB (A)

Weight:

Types 1, 2, 3:
Approx. 415 kg (915.0 lb.)
Types 4, 5:
Approx. 400 kg (881.9 lb.)

*1 Types 1 to 3

*2 Types 4 to 5